Send Email
Send SMS

Rajguru ElectronicsRajguru Electronics
Send Email
Send SMS

Our Products

Home » Our Products » QUADCOPTOR PARTS


We are actively engaged in offering quality assured gamut of Quadcoptor Parts. The offered motor is brush less and designed with quality assured array of stainless steel. These products are quality assured and rust free in nature. The product is highly appreciated and demanded by our customers for its light weight, smooth finish and high performance.

Electronic Speed Controller 30A - DYS

Electronic Speed Controller 30A - DYS
Approx. Price: Rs 750 / Piece

Description: This is a Multi-copter Brushless Motor Speed Controller with a running current of 30A. The power input uses extreme low output resistance greatly enhance the power stability, and has the protective effect on the battery.Separately voltage regulator IC for microprocessor. providing good anti-jamming capability. Using Simon K’s a dedicated multi-copter program tgy_debug, and the master chip with high stability crystal oscillator, making the motor control to more precise.


  • Running current:30A(Output: Continuous 30A, Burst 40A up to 10 Secs.)
  • Input Voltage: 2-5S LiPo
  • BEC: 5V 2amp.
  • Size: 46mm (L) * 26mm (W) * 11mm (H).
  • Weight: 23g
  • With SimonK updated firmware for Multicopter

Propeller Fan 10x4.5

Propeller Fan 10x4.5
Approx. Price: Rs 110 / Pair

Counter Rotating Propeller 1045/1045R (CW + CCW) for Multirotors. Compatible with quadcopter, hexacopter and octocopter in various combinations of pusher and puller propeller. Compatible with BE2208 brushless motors with prop adapters. It is also compatible with other brushless motor. It comes with multiple diameter fixture rings so it can fit most of motors with various prop adapters and shaft diameters. Sold in pair only.

  • E-Prop 10X4.5R CW,CCW(paired)
  • DYS Precision Propeller
  • Material:Glass Fibre+Nylon
  • Well balanced and precision moulded

KK2.1.5 Multi-Rotor LCD Flight Control Board with 6050MPU An

KK2.1.5 Multi-Rotor LCD Flight Control Board with 6050MPU An
Approx. Price: Rs 1,250 / Piece(s)

The next evolution of the rotor revolution is here!! The KK2.1 is packing new found power with updated sensors, memory and header pins.

The KK2.1 is next big evolution of the first generation KK flight control boards. The KK2.1 was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts. The LCD screen and built in software makes install and setup easier than ever. A host of multi-rotor craft types are pre-installed, simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and you’re ready to go! All of which is done with easy to follow on screen prompts!

The original KK gyro system has been updated to an incredibly sensitive 6050 MPU system making this the most stable KK board ever and allowing for the addition of an auto-level function. At the heart of the KK2.1 is an Atmel Mega644PA 8-bit AVR RISC-based microcontroller with 64k of memory. An additional polarity protected header has been added for voltage detection, so no need for on-board soldering. A handy piezo buzzer is also included for audio warning when activating and deactivating the board.

The KK2.1 added polarity protection to the voltage sense header and a fuse protected buzzer outputs, in case something is accidentally plugged in incorrectly. The voltage sense line has been updated for better accuracy. The board is clearly labeled and the voltage sense line color has been changed to red for easy identification, making installation and connections a snap.

If you’re new to multi-rotor flight or have been unsure about how to setup a KK board then the KK2.1 was built for you. The 6 Pin USBasp AVR programming interface ensures future software updates will be quick and easy.


  • Size: 50.5mm x 50.5mm x 12mm approximately
  • Weight: 21 gram(Inc Piezo buzzer)
  • IC: Atmega644 PA
  • Gyro/Acc: 6050MPU InvenSense Inc.
  • Auto-level: Yes
  • Input Voltage: 4.8-6.0V
  • AVR interface: standard 6 pin.
  • Signal from Receiver: 1520us (5 channels)
  • Signal to ESC: 1520us


R450 Quadrotor Frame with Integraed PCB for Easy Wiring

R450 Quadrotor Frame with Integraed PCB for Easy Wiring
Approx. Price: Rs 700 / Piece(s)


Built from quality glass fiber and polyamide nylon.
Integrated PCB connections for direct soldering of your ESCs
Pre-threaded brass sleeves for all of the frame bolts.
Colored arms for orientation to keep you flying in the right direction.
Large mounting tabs on main frame bottom plate for easy camera mounting.
Easy assembly.

Width: 450mm
Height: 55mm
Weight: 270g (w/out electronics)
Motor Mount Bolt Holes: 16/19mm

Imax RC B3 Compact Balance Charger for RC Toy 2S/ 3S

Imax RC B3 Compact Balance Charger for RC Toy 2S/ 3S
Approx. Price: Rs 600 / Piece(s)

With the development of electric technology, we have a new design of easy compact balance charger for 2 and 3 cells LiPo battery fast charging with wide AC input. A internal 100-240V AC switch power is built in, and the high precision balance circuit can supply larger current up to 850mA per cell. Double colour LED can display the process of charging (RED: charging; GREEN: full). This charger is compact and light, especially there is separated corresponding balance port for each battery pack.


  1. Please firstly connect the B3 Pro charger to power, while the three power LEDs will turn from red to green, which indicating that the charger works in good order.
  2. (Set 3s battery pack for example) Secondly, please connect the battery pack to 3s balance port , while the three power LEDs will all turn into red and charging begins. Please note once the charging of one cell is done, the corresponding power LED for it will turn green.
  3. When the three power LEDs all turn green, the charging for 3S battery pack is Finished.

Please correctly connect the Imax B3 Compact charger to power and battery pack according to the procedure outlined in user manual. Please use this charger under supervision.Please place the charger in a dry environment and keep it away from fire. Please don't tightly pull and drag the power cord or replace it, or else the fire/electric shock will be caused. Please don't touch the charger and power with wet hands or it will bring in electric shock. To extend the working life of the charger, please remove it from power once charging is finished. Children must be watched by adults to use the charger.

2.4G FlySky FS-CT6B 6-Channel Transmitter Receiver (R6B)

2.4G FlySky FS-CT6B 6-Channel Transmitter Receiver (R6B)
Approx. Price: Rs 2,750 / Piece(s)

Description :-

This is FS-CT6B 6ch 2.4GHz transmitter & receiver It has 0.8W transmitter with range up to 1km line of sight.

Channels: 6
Frequency: 2.4GHz
Type 2 remote control. (Throttle on the left side)
Transmitter power: 0.8W
Requires 8 AA size batteries
Four model memory
Computer programmable
USB programming cable and program CD included

Package contains
One 6 Channel Remote control
One 6 channel receiver
One USB interface cable
One CD containing software

Brushless Motor D2826-1800KV

Brushless Motor D2826-1800KV
Approx. Price: Rs 750 / Piece(s)

D2826 Brushhless Motor
  • KV:1800KV
  • Pull: 960g
  • Motor size: Φ28×26
  • Battery: 7.4-11.1V
  • Max power 342Watt
  • ESC 40A

Brushless Motor D2826-1400KV

Brushless Motor D2826-1400KV
Approx. Price: Rs 750 / Piece(s)

Model: 2826-10
Motor size: 28*26mm
Shaft size: 3.175*37mm
Weight: 50g
KV(rpm/v): 1400
Max Power: 205W
Battery: 2-3Li-Po
Prop: 9x4.7/7x4
Ri(M ): 0.078
ESC: 30A

Brushless Motor D2826-1100KV

Brushless Motor D2826-1100KV
Approx. Price: Rs 750 / Piece(s)

  • Item name: D2826 1100KV
  • Pull: 660g
  • Voltage: 7.2v~11.1v 2s~3s Lipoly
  • Kv: 1100rpm/v
  • Shaft: 3.17mm Diameter
  • Max Watts: 102W
  • Suggested Propeller: 8x6(2s) 7x4(3s

Flysky FS-i6 6CH 2.4GHz Transmitter and Receiver Set

Flysky FS-i6 6CH 2.4GHz Transmitter and Receiver Set
Approx. Price: Rs 4,000 / Piece(s)

Transmitter Description:
  • Item Name: FS-i6 transmitter
  • Channel: 6
  • Model Type: fixed wing/helicopter/glider RF Range: 2.405 - 2.475GHz
  • Bandwidth: 500khz
  • RF Power: less than 20dBm
  • RF mode: AFHDS 2A
  • Modulation type: GFSK
  • Channel resolution: 1024
  • steps Low voltage warning: less than 4.2v ANT length: 26 x 2mm( dual antenna)
  • Weight: 392g
  • Battery: 6v 1.5AA x 4(not included)e
  • Size: 174 x 89 x 190 mm
  • Color: black

Receiver specification:
  • Channel: 6
  • Model type: fixed wing/helicopter/glider RF receiver sensitivity: -105dBm
  • Modulation: GFSK
  • System type: AFHDS2A/AFHDS
  • Channel resolution: 1024
  • steps Bind port: yes
  • Power port: yes( VCC)
  • Power: 4V -6.5V DC Weight: 6.4g
  • Antenna lenght: 26mm Size: 40.4 x 21.1 x 7.35 mm
Works in the frequency range of 2.405 to 2.475GHz.This band has been divided into 142 independent channels,each radio system uses 16 different channels and 160 different types of hopping algorithm.

This radio system uses a high gain and high quality multi directional antenna,it covers the whole frequency band. Associated with a high sensitivity receiver,this radio system guarantees a jamming free long range radio transmission

Each transmitter has a unique ID,when binding with a receiver,the receiver saves that unique ID and can accepts only data from the unique transmitter.this avoids picking another transmitter signal and dramatically increase interference immunity and safety.

This radio system uses low power electronic components and sensitive receiver chip.The RF modulation uses intermittent signal thus reducing even more power consumption.

AFHDS2A system has the automatic identification function,which can switch automatically current mode between single-way communication mode and two-way communication mode according to the customer needs.

AFHDS2A has built-in multiple channel coding and error-correction,which improve the stability of the communication,reduce the error ratio and extend the reliable transmission distance.

Dean Connectors

Dean Connectors
Approx. Price: Rs 75 / Piece

Description:- Do you have an R/C vehicle battery pack that desperately needs a Deans connector? With our new M/F Deans connector pair, you’ll have just what you need to safely and securely connect your battery or anything else that requires a mini T Plug.

Each pack comes with one male and one female Deans connector and each can support a current of, up to, 30A.


  • 14 AWG silicon wire with 6" (152mm) length.
  • Max. load 30 Amp
  • Perfect for DIY with both RC car rechargeable battery pack.
  • Red wire indicates positive polarity
  • Black wire indicates negative polarity.
  • Come with two pin female Dean plug
  • Vertical plug = Positive
  • Horizontal plug = Negative
  • Plug's dimension (LxWxH): 6.5mm (0.3") x 4.1mm (0.2") x 2.2mm(0.1")
  • Weight: 1.4 Oz (39.6 grams)


3.5 mm Male and Female Gold Plated Bullet Connectors

3.5 mm Male and Female Gold Plated Bullet Connectors
Approx. Price: Rs 75 / Piece

3.5MM bullet connectors are designed for medium duty use, capable of sustaining 60A with higher bursts. Technically they're "genderless" with multiple possible configurations and no universally accepted "right" way, however the most common configuration for a "female" end has the female bullet / larger plastic housing on the positive wire with the male bullet / smaller plastic housing on the negative wire - the "male" end has the male bullet / smaller plastic housing on the positive wire with the female bullet / larger plastic housing on the negative wire.
  • Low resistance, and gives the best electric flow
  • Internal Diameter: 3.5mm
  • Male Connector Length: 0.50' (12mm)
  • Female Connector Length: 0.53' (13.5mm)

XT60 Connector

XT60 Connector
Approx. Price: Rs 100 / Piece

Made from high-temp Nylon and gold plated spring connectors, both included in the injection mould at the time when forming the connector. The XT60 ensures a solid high-amp connection, perfect for applications up to and beyond 65A constant.

XT60, Designed by hexTronik to be more reliable and a better quality connection than Deans T-Connectors.

A2212 1000KV Motor

A2212 1000KV Motor
Approx. Price: Rs 400 / Piece(s)

Item NO.: A2212
Dimension: 27.8*27mm
Shaft diameter: 3.17mm
Max Efficiency: 80%
Max Efficiency Current: 4-10A (>75%)
Current Capacity: 12A/60s
No Load Current @ 10V: 0.5A
No. Of Cells: 2-3 Li-Poly
Weight: 65g
KV: 1000
Suitable for the propeller size: 1047,1060,9050

A2212 1400KV Brushless Motors

A2212 1400KV Brushless Motors
Approx. Price: Rs 400 / Piece(s)


KV: 1400
Max Efficiency: 80%
Max Efficiency Current: 4-10A (>75%)
Current Capacity: 12A/60s
No Load Current @ 10V: 0.5A
No. Of Cells: 2-3 Li-Poly
Motor Dimensions: Φ27.5 x 30mm
Shaft Diameter: Φ3.17mm
Package size: 17 * 10 * 4cm / 6.5 * 3.9 * 1.6in
Package weight: 259g / 9.1oz


Approx. Price: Rs 750 / Piece(s)

Product details:-

This is 30A ESC for multirotor
This hardware, with the SimonK firmware, gives you the perfect solution for multirotor use.
Highest efficiency 100% N-FET design.
Highest accuracy with crystal oscillator (Temperature won't affect the PWM operating range like other cheap ESC's).
No low voltage cutoff, because any cutoff in a multirotor = crash.
No over temp cutoff, because any cutoff in a multirotor = crash.
Super high refresh rate, no buffering of the input signal, resulting in more than 490Hz response rate.
16KHz motor frequency, giving fastest response of the motor, and quietest operation as well (no 8KHz squeal).
Super simple, foolproof operation. Nothing to program other than the throttle range


Continuous Current:30ABurst
LIpo Cells:2-4

Lipo Battery 11.1v 2200mah 25c

Lipo Battery 11.1v 2200mah 25c
Approx. Price: Rs 1,200 / Piece(s)


  • 3-Cell Li-Po rechargeable battery
  • Capacity: 2200mAh
  • Voltage: 11.1V
  • Size : 107mm x 30mm x 23mm
  • Charger Time: about 1.5 hours (by input 1A)
  • Weight: 148g
  • Plug: Futaba plug & JR plug
  • Fit Futaba KO Ridio transmitter and 7 ch above 7 ch transmitter and JR propo, Spektrum Radio transmitter

Battery Charger (IMAX B6-AC)

Battery Charger (IMAX B6-AC)
Approx. Price: Rs 1,800 / Piece


This item is for a rapid charger/discharger for all kind of battery of RC hobby, with built in balancer for li-po battery. Battery that can be charged by this charger,Lipo / Li-ion / LiFe / NiMh / NiCad / Pb / Lead Acid.


- High-power and high-performance circuit Microprocessor controlled
- Maximen safety: Delta-peak sensitivity, Capacity limit, processing time limit,tempreture limit, input power monitor
- Monitoring the voltage of individual cell
- Can charge Li-ion / LiPo / LiFe 1-6 cells, and Ni-Cd / NiMH 1 -15 cells
- Dual Power, built-in AC adapter
- UndefinedLarge range of charge currents
- Store function, allows safe storage current, and data storage (Store up to 5 packs in memory)


- Color: Bright blue
- Operation voltage range: DC 11.0 ~ 18.0 Volt or AC 100V ~ 240V 50/60Hz
- Circuit power: AC to DC adaptor (DC 11.0 ~ 18.0V / 5A)
- Max. charge power 50W
- Max. discharge power 5W
- Charge current range: 0.1~5.0A
- Discharge current range: 0.1~1.0A
- Current drain for balancing Li-Po: 300mAh/cell
- NiCd / NiMH battery cell count: 1~15 cell
- Li-Ion / Polymer cell count: 1~6 series
- Pb battery voltage: 2V~20V
- Weight: 546g (Net Weight)

Power Distribution Board

Power Distribution Board
Approx. Price: Rs 175 / Piece(s)


  • Weighs only 7g (Board only)
  • Outer dimensions: 50x50mm
  • Outer mounting holes: 46x46mm
  • Inner mounting holes: 36x36mm
  • Includes board, 14ga wire, T-Plug, heat shrink

FlySky FS-TH9X 2.4G 9CH System (TX RX)

FlySky FS-TH9X 2.4G 9CH System (TX   RX)
Approx. Price: Rs 7,000 / No(s)

FS-Th9X has revolutionized the way people experience RC, and now this radio transmitter can stand up to the top competitions.
AFHDS (automatic frequency hopping digital system), is developed by FLYSKY for all the Radio Control model lovers and is patented by FLYSKY at home. The system is specially developed for all the Radio control models, that offers super active and passive anti-jamming capabilities, very low power consumption and high receiver sensitivity. With extreme rigorous testing by engineers and studying the markets for years, FLYSKY AFHDS is now considered to be the one of the best systems available in the market.


2.4GHz is the standard of new generation radio system because it has a lot of advantages. Operating at 2.4 GHz puts the radio control out of the frequency range of any 'noise' generated by the other electronic components on your helicopter - such as the brushless motor, Electronic speed controller, Servos and any metal to metal noise - eliminating interference and glitching that can affect traditional frequency system.

FS TH9X 2.4GHz 9 Channel RC Helicopter/Plane Transmitter Specification



- channels: 9channels;
- model type:heli,airplane,glid;
- RF power:less than 20db;
- modulation:GFSK;
- code type:PPM/PCM;
- sensitivity:1024;
- lcd type:128*64 dot;
- low voltage warning:yes;
- DSC port:yes;
- charger port: yes;
- power:12VDC(1.5AAA*8);
- weight:680g;
- ANT length:26mm;
- size:190*80*240mm;
- Color: black;
- certificate: CE?FCC;

Landing Gear Tripod - 6 Axis

Landing Gear Tripod - 6 Axis
Approx. Price: Rs 250 / Piece

It is a high landing gear aerial photography tripod used in quad copter 6 axis drone aircraft.

Key Features

  • High Quality material for durability.
  • Height:150 mm.
  • weight:90 gm.
  • Easy to install.
  • Include 4pcs for one full set.
  • Include M2.5*8 Screws for assembling.


Rajguru Electronics
Dileep Jain (Manager)
399 3rd Floor , Manek Chambers , Above Vasant Bhavan Restaurant, Lamington Road
Mumbai - 400004, Maharashtra, India

Contact via E-mail

Contact via SMS

Home  |  Profile  |  Our Products  |  Site Map  |  Contact Us

Member © Rajguru Electronics. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited