Rajguru Electronics
Rajguru Electronics
Lamington Road, Mumbai, Maharashtra
SEND SMS
SEND EMAIL

Display & LCD

We are one of the pioneered suppliers of Display & LCD from Mumbai. These are made of superior quality raw-materials procured from from the trusted vendors. Our range of products are widely appreciable for the clarity and a scratch resistant screen which are technologically advanced and have superior finish. Our product range includes Display & LCD such as Graphic Green LCD Green, Graphic Blue LCD, LCD With Blue Back-light, LCD With Green Back Light, LCD With Blue Back Light and Seven Segment Display CA.

2.9inch E- Paper Display Module

2.9inch E- Paper Display Module
  • 2.9inch E- Paper Display Module
  • 2.9inch E- Paper Display Module
  • 2.9inch E- Paper Display Module
Ask For Price
Overview

This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.

Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Specifications
  • Operating voltage: 3.3V
  • Interface: 3-wire SPI, 4-wire SPI
  • Outline dimension: 89.5mm × 38mm
  • Display size: 66.89mm × 29.05mm
  • Dot pitch: 0.138 × 0.138
  • Resolution: 296 × 128
  • Display color: black, white
  • Grey level: 2
  • Refresh power: 26.4mW(typ.)
  • Standby power: <0.17mW
  • Viewing angle: >170°
Interface
SYMBOLDESCRIPTION
VCC3.3V
GNDGround
DINSPI MOSI pin
CLKSPI SCK pin
CSSPI chip selection, low active
DCData/Command selection (high for data, low for command)
RSTExternal reset, low active
BUSYBusy status output, low active
Request
Callback
Yes! I am interested

2.13inch E- Paper Display HAT for Raspberry Pi

2.13inch E- Paper Display HAT for Raspberry Pi
  • 2.13inch E- Paper Display HAT for Raspberry Pi
  • 2.13inch E- Paper Display HAT for Raspberry Pi
  • 2.13inch E- Paper Display HAT for Raspberry Pi
  • 2.13inch E- Paper Display HAT for Raspberry Pi
  • 2.13inch E- Paper Display HAT for Raspberry Pi
  • 2.13inch E- Paper Display HAT for Raspberry Pi
Ask For Price
Overview

This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.

Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi 2B/3B/Zero/Zero W
  • Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Specifications
  • Operating voltage: 3.3V
  • Interface: SPI
  • Outline dimension: 65mm × 30.2mm
  • Display size: 23.71mm × 48.55mm
  • Dot pitch: 0.194 × 0.194
  • Resolution: 250 × 122
  • Display color: black, white
  • Grey level: 2
  • Refresh power: 26.4mW(typ.)
  • Standby power: <0.17mW
  • Viewing angle: >170°
Interface
SYMBOLDESCRIPTION
VCC3.3V
GNDGround
NCNC
DINSPI MOSI pin
CLKSPI SCK pin
CSSPI chip selection, low active
DCData/Command selection (high for data, low for command)
RSTExternal reset, low active
BUSYBusy status output, low active
Request
Callback
Yes! I am interested

1.54inch E- Paper Display Module

1.54inch E- Paper Display Module
  • 1.54inch E- Paper Display Module
  • 1.54inch E- Paper Display Module
  • 1.54inch E- Paper Display Module
  • 1.54inch E- Paper Display Module
  • 1.54inch E- Paper Display Module
  • 1.54inch E- Paper Display Module
  • 1.54inch E- Paper Display Module
Ask For Price
Overview

This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.

Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Specifications
  • Operating voltage: 3.3V
  • Interface: 3-wire SPI, 4-wire SPI
  • Outline dimension: 48mm × 33mm
  • Display size: 27.6mm × 27.6mm
  • Dot pitch: 0.138 × 0.138
  • Resolution: 200 × 200
  • Display color: black, white
  • Grey level: 2
  • Refresh power: 26.4mW(typ.)
  • Standby power: <0.17mW
  • Viewing angle: >170°
Interface
SYMBOLDESCRIPTION
VCC3.3V
GNDGround
DINSPI MOSI pin
CLKSPI SCK pin
CSSPI chip selection, low active
DCData/Command selection (high for data, low for command)
RSTExternal reset, low active
BUSYBusy status output, low active
Request
Callback
Yes! I am interested

LCD With Green Back Light - 16x2

LCD With Green Back Light - 16x2
  • LCD With Green Back Light - 16x2
Get Best Quote
Approx. Price: Rs 150 / Piece

This is a high quality 16 character by 2 line intelligent display module, with back lighting, Works with almost any microcontroller.
This is a popular 16x2 lcd display. It is based on the hd44870 display controller hence it is easy to interface with most micro controllers. It works of 5v and has a green back light which can be switched on and off as desired. The contrast of the screen can also be controlled by varying the voltage at the contrast control pin (pin 3).

Features

  • 16 Characters x 2 Lines
  • 5x7 Dot Matrix Character Cursor
  • HD44780 Equivalent LCD Controller/driver Built-In
  • 4-bit or 8-bit MPU Interface
  • Standard Type
  • Works with almost any Microcontroller
  • Great Value Pricing
Request
Callback
Yes! I am interested
View PDF

LCD With LCD Module Blue Backlight - 16x2

LCD With LCD Module Blue Backlight - 16x2
  • LCD With LCD Module Blue Backlight - 16x2
Get Best Quote
Approx. Price: Rs 150 / Piece

This is a popular 16x2 LCD With Blue Backlight display. It is based on the HD 44870 display controller which makes it is easy to interface this lcd most microcontrollers. Its extreme popularity ensures that no matter which micro controller platform you are using, you will definitely find ready libraries to use this LCD.

It works of 5v and has a blue backlight which can be switched on and off as desired. The contrast of the screen can also be controlled by varying the voltage at the contrast control pin (pin 3).

Request
Callback
Yes! I am interested
View PDF

LCD With Green Backlight - 20X4

LCD With Green Backlight - 20X4
  • LCD With Green Backlight - 20X4
Get Best Quote
Approx. Price: Rs 400 / Piece
A new high-quality 4 line 20 character LCD module not only set the contrast control knob selector switch also has a backlight and IIC communication interface. For Arduino beginners, not for the cumbersome and complex LCD driver circuit connection and a headache, the real significance of this LCD module will simplify the circuit, this module directly into the Arduino Sensor Shield V5.0 sensor expansion board IIC device interface can, GM 4P sensor connection cable, programmed through the Arduino controller, you can easily identify the slogan, sensor data records.

Specs:
Interface: I2C
I2C Address: 0x3F
Back lit (White with Black char color)
Supply voltage: 5V
Pcb Size : 60mmx99mm
Contrast Adjust : Potentiometer
Request
Callback
Yes! I am interested

LCD With Blue Back Light - 20X4

LCD With Blue Back Light - 20X4
  • LCD With Blue Back Light - 20X4
Get Best Quote
Approx. Price: Rs 400 / Piece

This is a popular 20x4 LCD With Blue Back Light display. It is based on the HD 44870 display controller which makes it is easy to interface with most micro controllers. Its extreme popularity ensures that no matter which micro controller platform you are using this LCD on, you will definitely find ready libraries to use this LCD

It works of 5v and has a blue back light which can be switched on and off as desired. The contrast of the screen can also be controlled by varying the voltage at the contrast control pin.

Request
Callback
Yes! I am interested
View PDF

Graphic Blue LCD - 128x64

Graphic Blue LCD - 128x64
  • Graphic Blue LCD - 128x64
Get Best Quote
Approx. Price: Rs 550 / Piece

Customers can avail from us Graphic Blue LCD for displaying alphanumeric characters and other kind of simple graphics. For facilitating neat minus and animations our products are highly demanded in the market. Available in standard size of 128 X 64, these graphic blue LCD's are highly appreciated for their advance features, optimum durability and high compatibility with varied modern devices such as ports and USB.This is a graphic lcd with blue backlight that can display not just alphanumeric characters but also simple graphics. Great for doing neat menus and animations. Can handle 128 64 pixels and comes with a black frame.

This is a 128x64 liquid crystal display that support Chinese character , English characters and even graphics, very suitable for interactive work with Arduino.

  • Voltage: 5V
  • With Chinese font
  • Blue backlit
  • Size: 93x70mm

 

Request
Callback
Yes! I am interested
View PDF

Graphic LCD Green - RG12864

Graphic LCD Green - RG12864
  • Graphic LCD Green - RG12864
Get Best Quote
Approx. Price: Rs 550 / Piece

Product Details:

DesignStandard
BrandRG
ApplicationUsing with Microcontrollers
Model NumberRG12864

DESCRIPTION: We are offering quality tested Graphic LCD Green 128*64 that can display not only alphanumeric data but simple graphics also. Fabricated from advance technology, these LCD's are highly suitable for animations and neat menus. Moreover, our product can handle the128*64 pixels and comes with a black frame. Customers can avail this range in desired specifications and configurations at most competitive prices.

Features

  • Easy To Use
  • Works with Most Microcontrollers
  • Built-in Controller (KS0108B)
  • 5V Power Supply
  • 1/64 Duty Cycle
  • Built-in Backlight
  • Ideal for Moving Displays & Graphics
  • Good Value for money

 

 

Request
Callback
Yes! I am interested
View PDF
X
Looking for “Display & LCD”?


Reach Us
Dileep Jain (Manager)
399 3rd Floor , Manek Chambers , Above Vasant Bhavan Restaurant Lamington Road
Mumbai- 400004, Maharashtra, India


Call Us

Send E-mail

Send SMS