Rajguru Electronics
Rajguru Electronics
Lamington Road, Mumbai, Maharashtra
SEND SMS
SEND EMAIL

Flex And Force Sensor

Our range of products include flex sensor 2.2, force sensing resistor fsr400, force sensing resistor 0.5 fsr402, force sensing resistor fsr406, flex sensor 4.5 and flexiforce pressure sensor - 100lbs.

Flex Sensor 2.2

Flex Sensor 2.2
  • Flex Sensor 2.2
Get Best Quote
Approx. Price: Rs 450 / Piece(s)

A simple Flex Sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. I love the Nintendo Power Glove. It's so bad! The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend). Connector is 0.1" spaced and bread board friendly. Check datasheet for full specifications.

Note: Please refrain from flexing or straining this sensor at the base. The usable range of the sensor can be flexed without a problem, but care should be taken to minimize flexing outside of the usable range. For best results, securely mount the base and bottom portion and only allow the actual flex sensor to flex.

 

Request
Callback
Yes! I am interested
View PDF

Force Sensing Resistor FSR400

Force Sensing Resistor FSR400
  • Force Sensing Resistor FSR400
Get Best Quote
Approx. Price: Rs 450 / Piece

This is a small force sensitive resistor. It has a 0.16" (4 mm) diameter active sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR, its resistance will be larger than 1MΩ, with full pressure applied the resistance will be 2.5kΩ. Two pins extend from the bottom of the sensor with 0.1" pitch making it bread board friendly. These sensors are simple to set up and great for sensing pressure, but they aren't incredibly accurate. Use them to sense if it's being squeezed, but you may not want to use it as a scale.

Dimensions:

  • Overall length: 1.75"
  • Overall width: 0.28"
  • Sensing area: 0.3"
    Request
    Callback


    Additional Information:

    • Item Code: FSR-400
    Yes! I am interested

    Force Sensing Resistor 0.5 FSR402

    Force Sensing Resistor 0.5 FSR402
    • Force Sensing Resistor 0.5 FSR402
    Get Best Quote
    Approx. Price: Rs 500 / Piece

    Description: This is a Force sensitive resistor with a round, 0.5" diameter, sensing area. This FSR 402 will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.

     

    Two pins extend from the bottom of the sensor with 0.1" pitch making it bread board friendly. There is a peel-and-stick rubber backing on the other side of the sensing area to mount the FSR.

     

    Just Connect a resistor to form a voltage devider and meassure the voltage at the junction to find the force applied.These sensors are simple to set up and great for sensing pressure, but they aren't incredibly accurate. Use them to sense if it's being squeezed, but you may not want to use it as a scale.

     

    Dimensions:


    • Overall length: 2.375"
    • Overall width: 0.75"
    • Sensing diameter: 0.5"
    Request
    Callback


    Additional Information:

    • Item Code: FSR-402
    Yes! I am interested
    View PDF

    Force Sensing Resistor FSR406

    Force Sensing Resistor FSR406
    • Force Sensing Resistor FSR406
    Get Best Quote
    Approx. Price: Rs 625 / Piece

    Description: This is a Force sensitive resistor with a square, 1.75x1.5", sensing area. This FSR 406 will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg. Two pins extend from the bottom of the sensor with 0.1" pitch making it bread board friendly. There is a peel-and-stick rubber backing on the other side of the sensing area to mount the FSR.

     

    Just Connect a resistor to form a voltage devider and meassure the voltage at the junction to find the force applied.These sensors are simple to set up and great for sensing pressure, but they aren't incredibly accurate. Use them to sense if it's being squeezed, but you may not want to use it as a scale.

     

    Dimensions:


    • Overall length: 3.5"
    • Overall width: 1.75"
    • Sensing area: 1.75x1.5"
    Request
    Callback


    Additional Information:

    • Item Code: FSR-406
    Yes! I am interested
    View PDF

    Flex Sensor 4.5

    Flex Sensor 4.5
    • Flex Sensor 4.5
    Get Best Quote
    Approx. Price: Rs 700 / Piece(s)

    A simple Flex Sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo power glove. I love the Nintendo Power Glove. It's so bad! The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend). Connector is 0.1" spaced and bread board friendly. Check datasheet for full specifications.

    Request
    Callback
    Yes! I am interested
    View PDF

    Flexiforce Pressure Sensor - 100lbs

    Flexiforce Pressure Sensor - 100lbs
    • Flexiforce Pressure Sensor - 100lbs
    Get Best Quote
    Approx. Price: Rs 2,200 / Piece(s)
    Description: This is a Piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing hard, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pressure is applied to the round area at the end of the sensor. Used as a presence sensor (someone standing), weight sensor, pressure sensor (impact testing), etc. The overall length is about 8.5". Sensor comes with 0.1" spaced, reinforced, breadboard friendly connector. Flexiforce Pressure sensor comes in three flavors. Flexiforce Pressure sensor ranges from 0 to 100lbs of pressure in the mega-ohm range.

    Other Details:
    • Detect and measure a relative change in force or applied load
    • Detect and measure the rate of change in force
    • Identify force thresholds and trigger appropriate action
    • Detect contact and/or touch
    Request
    Callback


    Additional Information:

    • Item Code: Flexi-Force-Sensor
    Yes! I am interested
    View PDF
    X
    Looking for “Flex And Force Sensor”?


    Reach Us
    Dileep Jain (Manager)
    399 3rd Floor , Manek Chambers , Above Vasant Bhavan Restaurant Lamington Road
    Mumbai- 400004, Maharashtra, India


    Call Us

    Send E-mail

    Send SMS