This product is an embedded module based on the universal serial interface network standard,built-in TCP / IP protocol stack, enabling the user serial port, wireless network (wifi) interface between the onversions. Through the HLK-M30 module, the traditional serial devices do not need to change any configuration, userdata can be transmitted through the Internet network. Provide a quick solution for the user's serial devices to transfer data via WiFi.
HLK-M35 is a new low-cost embedded UART-WIFI module (serial port -Wireless)
This product is an embedded module based on the universal serial interface network standard,built-in TCP / IP protocol stack, enabling the user serial port,wireless network (wifi) interface between the onversions.Through the HLK -M35 module, the traditional serial devices do not need to change any configuration,userdata can be transmitted through the Internet network. Provide a quick solution for the user’s serial devices to transfer data via WIFI.
This module is with lower power 3.3V 100mA, start time only need 1 seconds. Smart size, only 18*25*2.5mm, easier secondary development.
Support 2 types of work mode: WiFi STA/AP.
|Network standard||Wireless standard: IEEE 802.11n, IEEE 802.11g, IEEE 802.11b|
|Cable standard: IEEE 802.3, IEEE 802.3u|
|Wireless transmission rate||11n: Max.150Mbps|
|Interface||2 Ethernet ports, 2 serial ports, 1 USB port (host/slave), GPIO|
|Antenna type||Board antenna / external antenna (optional)|
|Function and parameter|
|WIFI working mode||Wireless network card / wireless access point / wireless router|
|WDS function||WDS wireless bridge|
|Wireless security||Wireless MAC address filtering|
|Wireless switch security function|
|64/128/152 bit WEP encryption|
|WPA/WPA2, WPA-PSK/WPA2-PSK security mechanism|
|Network management||Remote Web management|
|Configuration file import and export|
|WEB software upgrade|
|Serial communication network|
|TCP connection||Maximum connection number >20|
|UDP connection||Maximum connection number >20|
|Serial baud rate||1200~2500000bps (1<=n<=65535 2500000/n)|
|Indicator Status||Indicator Status|
|Environmental standard||Working temperature: -20-55|
|Working humidity: 10%-90%RH (not setting)|
|Storage temperature: -40-80|
|Storage humidity: 5%-90%RH (not setting)|
|Other properties||Band bandwidth (optional): 20MHz, 40MHz, automatic|
HLK-SW16 is a new professional remote control terminal developed by Hi-Link Electronic Co., Ltd, which can implement the TCP connection through the gateway and establish communication with the remote device. It make the network client and equipment connect directly on the basis of none modifying the original communication protocol, saving development cycle, improve the user’s experience.
Compared with the traditional way (dynamic domain name plus router port mapping), it has incomparable superiority, eliminating the need for users to apply for a dynamic domain name, make frequent operations, such as port mapping on the router, so that equipment can achieve plug and play results.
model : hlk-wifi-m03
double ( 2 x 4 ) pin type interface
support Baud rate : range 1200 ~ 115200bps
support hardware rts / cts flow control
single 3.3v power supply
support ieee802.11b / g wireless
frequency range of : support 2.412 ~ 2.484 ghz
support two wireless network type :
The base of the net infra ( ) and ad ( adhoc )
support multiple safety certification : mechanism
wep64 / wep128 / tkip / ccmp ( aes )
wep / wpa-psk / wpa2-psk
support speed networking
support wireless roaming
support multiple network protocol :
tcp udp / / icmp / dhcp / dns / http
support automatic and order 20 modes
This WIFI modules suitable for: desktop computers, netbooks, MID (tablet), set-top boxes, cameras, Internet radio, digital photo frame, fitness equipment, medical equipment, lighting control, door control, logistics network monitoring equipment, and so on need to adopt various use wireless transmitting data. Desktop computers, netbooks, MID (tablet), set-top boxes, cameras, Internet radio, digital photo frame, fitness equipment, medical equipment, lighting control, door control, logistics network monitoring equipment.
- Hardware:Chipset Ralink RT3070
- Host interface:USB2.0/1.1, type A
- LEDS:Link/ Activity
- Antenna:Built-in PCB antenna
- Frequency:2412~2483.5MHz, ISM band.
- Transmit Power:802.11b:17+/-1.5dBm; 802.11g:14+/-1.5dBm
- Receive Sensitivity:802.11b:-84+/-1.5dBm@11Mbps; 802.11g:-69+/-1.5dBm@54Mbps
- Operation System:Windows CE/2000/XP/Vista; Linux 2.6.X;Mac OS X
- Security:WEP 64/128bit,WPA,WPA2,802.1X ,Cisco CCS V1.0,2.0 and V3.0 Compliant.
- Voltage Range*:DC 5.0V±5%:
- Operating Temperature: 0℃-50℃
- Storage Temperature:-20℃-70℃
- Operating Humidity:RH 95%(Non-Condensing)
- Storage Humidity:RH 95%(Non-Condensing)
- Chipset: Ralink RT3070
- Standard: 802.11N compliance, Peak rate: 150Mbps
- Frequency: 2.4GHz, ISM band
- External antenna via IPEX receptacle
- Host interface: USB 2.0/1.1,
- USB Connection:6-pin. 2.0mm pitch male jumper
- Operation System: Windows CE/2000/XP/Vista
- Security:WHQL;Cisco CCX Linux2.6X;Mac OSX
- Operating Voltage:5.0 VDC +/- 5%
- Size: 40x18x8.7( PIN height)mm