Rajguru Electronics Private Limited
Rajguru Electronics Private Limited
Lamington Road, Mumbai, Maharashtra
SEND SMS
SEND EMAIL

MUP Connectors

Wholesale Trader of a wide range of products which include mpr121 - capacitive touch sensor breakout, mup-c746 dual sim card connector smt type, mup-c791 micro sim card connector - 8 pin, mup-m618 push type sim tf card connector, micro sim card connector mup-c790 and nano sim card connector mup-c782.

MPR121 - Capacitive Touch Sensor Breakout

MPR121 - Capacitive Touch Sensor Breakout
  • MPR121 - Capacitive Touch Sensor Breakout
Ask For Price

Product Details:

Minimum Order Quantity1 Piece
Communication ProtocolI2C
Operating Voltage2.5 and 3.6V DC
Low supply voltage mode1.71 to 2.75VDC
Size3 x 2cm (approx)

MPR121 Breakout Board
  • Capacitive touch sensor controller
  • Communication Protocol: I2C
  • Gives you 12 capacitive touch inputs and 1 virtual input
  • Features eight LED driving pins (When these pins are not configured as capacitive inputs, they may be used to drive LEDs)
  • Adjustable I2C Address via 4 jumpers on the bottom of the board. All jumpers are set (closed) by default. An address jumper ties the ADD pin to ground, meaning the default I2C address of the chip will be 0x5A. If you need to change the address of the chip (by shorting ADD to a different pin), make sure you open the jumper first. Jumpers also connect SDA, SCL and the interrupt pin to 10k pull-up resistors. If you don't require the pull-up resistors you can open the jumpers by cutting the trace connecting them.
  • Operating Voltage: 2.5 and 3.6V DC
  • Low-supply voltage mode (1.71-2.75VDC) activated by removing the 0.1uf capacitor between VREG and ground.
  • Size: 3 x 2cm (approx)
  • Add up to 12 capacitive touch pads with this easy to use 12-channel capacitive touch sensor breakout board. Turn any item into a touch sensor!
Request
Callback
Yes! I am interested

MUP-C746 Dual SIM Card Connector SMT Type

MUP-C746 Dual SIM Card Connector SMT Type
  • MUP-C746 Dual SIM Card Connector SMT Type
Ask For Price

Product Details:

Dimensions17.50LX17.50WX3.00H mm
WeightApprox. 0.90 +/- 0.2g
Durability5,000 cycles Min.
Operating temperature-40 deg C - +85 deg C
Connection8+8 PIN, SMT Type

1.General characteristics

Dimensions:17.10L*16.80W*3.70H mm

Weight:0.45g

Contact principle:Friction technology

Operating position:shaft up/down/horizontal

Mounting system:SMT(post optional)

Durability:1500 cycles min

 

2.Mechanical characteristics

Insulation material:Thermoplastic,UL 94V-0

 

3.Electrical characteristics

Number of contacts(optional:6pins

Contact resistance:50MΩ typical,1000 MΩ max

Insulation resistance:>1000 MΩ/500V DC

 

4.Solderability

Wave:not applicable

Vaporphase:215oC,30sec Max

IR reflow:230oC,15sec Max

Manual soldering:not applicable

 

5.Environmental characteristics

Operating temperature:-25oC≈ +70oC

Operating humidity:10%≈+95%RH

temperature:-40oC≈+85oC

Storage humidity:10%≈+95%RH

Thermal shock: -40oC+85oC,5cycles

Damp Heat:40oC,90%RH,10days

Salt-mist:35oC,5%Nacl,24H

Request
Callback
Yes! I am interested

MUP-C791 Micro SIM Card Connector - 8 Pin

MUP-C791 Micro SIM Card Connector - 8 Pin
  • MUP-C791 Micro SIM Card Connector - 8 Pin
Ask For Price

Product Details:

WeightApprox. 0.53 +/- 0.2 g
Durability5,000 cycles Min.
Contact resistance50m ohm typical, 100m ohm Max
Operating temperature-40 deg C - +85 deg C

Technical characteristics

1. General Characteristics

Dimensions: 15.90LX14.90WX1.50H mm

Weight: Approx. 0.53±0.2g

Durability:5,000 cycles Min.

2. Electrical Characteristics

Contact resistance: 50mΩ typical, 100mΩ Max.

Insulation resistance: >1000mΩ /500V DC

3. Solderability

Vapor phase: 215℃.30Sec.Max

IR reflow: 250℃.5Sec.Max

Manual soldering: 370℃.3Sec.Max

4. Environmental Characteristics

Operating temperature: -40℃~+85℃

Operating humidity: 10%~+95%RH

Request
Callback
Yes! I am interested
View PDF

MUP-M618 Push Type SIM TF Card Connector

MUP-M618 Push Type SIM TF Card Connector
  • MUP-M618 Push Type SIM TF Card Connector
Get Best Quote
Approx. Price: Rs 60 / Number
Feature:
  • SIM 6Pin+Micro SD 8Pin+Switch
  • SMT Type without post
  • Push Type
  • Blade Switch:Normally Open
  • DIM:17.40Lx16.50Wx2.70H mm
Technical characteristics

1.General characteristics

  • Dimensions: 17.40L*16.50W*2.70H mm
  • Weight:Approx: 1.20±0.2g
  • Contact principle: Friction technology
  • Operating position: shaft up/down/horizontal
  • Mounting system: SMT(without post)
  • Durability: 5000 cycles min

 

2.Mechanical characteristics

 

Insulation material: Thermoplastic,UL 94V-0

 

3.Electrical characteristics

 

  • Number of contact: 8pin SIM+8Pin TF
  • Contact resistance: 50MΩ typical,100MΩ max
  • Insulation resistance: >1000 MΩ/500V DC

 

4.Solderability

 

  • Wave: not applicable
  • Vaporphase: 215oC,30sec Max
  • IR reflow: 260oC,10sec Max
  • Manual soldering: 360oC,3sec Max

 

5.Environmental characteristics

 

  • Operating temperature: -25oC − +70oC
  • Operating humidity: 10% − +95%RH
  • temperature: -40oC − +85oC
  • Storage humidity: 10% − +95%RH
  • Thermal shock: -40oC+85oC,5cycles
  • Damp Heat: 40oC,90%RH,500H
  • Salt-mist: 35oC,5%Nacl,48H

Type Prepaid Postpaid

SIM Type GSM Card

Technology 3G

Memory 16 GB

Request
Callback
Yes! I am interested

Micro SIM Card Connector MUP-C790

Micro SIM Card Connector MUP-C790
  • Micro SIM Card Connector MUP-C790
  • Micro SIM Card Connector MUP-C790
  • Micro SIM Card Connector MUP-C790
Ask For Price

Product Details:

Dimensions13.40L X 13.40W X 2.40H mm
WeightApprox.0.50g
Card Size15.00 X 12.00 X 0.76mm
Contact principleFriction technology
Mounting TypeSMT (without post)
Number of Contacts6 Pins

Technical characteristics

1. General Characteristics

Dimensions: 13.40LX13.40WX2.40H mm

Weight: Approx. 0.40±0.1g

Durability: 5,000 cycles Min.

2. Electrical Characteristics

Contact resistance: 50mΩ typical, 100mΩ Max.

Insulation resistance: >1000mΩ /500V DC

3. Solderability

Vapor phase: 215℃.30Sec.Max

IR reflow: 250℃.5Sec.Max

Manual soldering: 370℃.3Sec.Max

4. Environmental Characteristics

Operating temperature: -40℃~+85℃

Operating humidity: 10%~+95%RH

Request
Callback
Yes! I am interested
View PDF

Nano Sim Card Connector MUP-C782

Nano Sim Card Connector MUP-C782
  • Nano Sim Card Connector MUP-C782
Ask For Price

Product Details:

Dimensions12.40 L X 9.80 W X 1.35 H mm
WeightApprox. 0.50 +/- 0.2g
Durability3,000 cycles Min.
Operating temperature-40 deg C - +85 deg C
Connection6 Pin SMT type

Technical characteristics

1. General Characteristics

Dimensions: 12.40LX9.80WX1.35H mm

Weight: Approx. 0.50±0.2g

Durability:3,000 cycles Min.

2. Electrical Characteristics

Contact resistance: 50mΩ typical, 100mΩ Max.

Insulation resistance: >1000mΩ /500V DC

3. Solderability

Vapor phase: 215℃.30Sec.Max

IR reflow: 250℃.5Sec.Max

Manual soldering: 370℃.3Sec.Max

4. Environmental Characteristics

Operating temperature: -40℃~+85℃

Operating humidity: 10%~+95%RH

Request
Callback
Yes! I am interested
View PDF

Nano Sim Card Connector MUP-C785

Nano Sim Card Connector MUP-C785
  • Nano Sim Card Connector MUP-C785
Ask For Price

Product Details:

MaterialMetallic
Sim typeNano
connectivity6 Pin

Technical characteristics

 

1. General characteristics

DIM: 14.30LX11.20WX1.20H mm

Durability: 1,500 cycles Min.

 

2. Electrical characteristics

Contact resistance: 50mΩ typical, 100mΩ Max.

Insulation resistance: >1000mΩ /500V DC

 

3. Solderability

Vapor phase: 215℃.30Sec.Max

IR reflow: 250℃.5Sec.Max

Manual soldering: 370℃.3Sec.Max

 

4. Environmental characteristics

Operating temperature: -40℃~+85℃

Operating humidity: 10%~+95%RH

Request
Callback
Yes! I am interested

Sim Card Connector MUP-C713

Sim Card Connector MUP-C713
  • Sim Card Connector MUP-C713
Ask For Price

Product Details:

Connection6/8PIN, SMT Type
Dimensions29.65LX17.20WX2.50H mm
WeightApprox. 1.01g
Durability5,000 cycles Min.

Technical characteristics

1. General Characteristics

Dimensions: 29.65LX17.20WX2.50H mm

Weight: Approx. 1.01g

Durability: 5,000 cycles Min.

2. Electrical Characteristics

Contact resistance: 50mΩ typical, 100mΩ Max.

Insulation resistance: >1000mΩ /500V DC

3. Solderability

IR reflow: 260℃.10Sec.Max

Manual soldering: 370℃.3Sec.Max

4. Environmental Characteristics

Operating temperature: -40℃~+85℃

Operating humidity: 10%~+95%RH

Request
Callback
Yes! I am interested
View PDF

Sim Card Connector MUP-C742

Sim Card Connector MUP-C742
  • Sim Card Connector MUP-C742
Ask For Price

Product Details:

Dimensions15.70LX16.40WX2.60H mm
WeightApprox. 0.52 +/- 0.2g
DurabilityDurability
Operating temperature-40 deg C - +85 deg C
Connection6 pin SMT type

General Characteristics

Dimensions: 15.70LX16.40WX2.60H mm

Weight: Approx. 0.52±0.2g

Durability: 5,000 cycles Min.

2. Electrical Characteristics

Contact resistance: 50mΩ typical, 100mΩ Max.

Insulation resistance: >1000mΩ /500V DC

3. Solderability

Vapour phase: 215℃.30Sec.Max

IR reflow: 250℃.5Sec.Max

Manual soldering: 370℃.3Sec.Max

4. Environmental Characteristics

Operating temperature: -40℃~+85℃

Operating humidity: 10%~+95%RH

Request
Callback
Yes! I am interested
View PDF

Sim Card Connector: MUP-C719

Sim Card Connector: MUP-C719
  • Sim Card Connector: MUP-C719
Ask For Price

Product Details:

Dimensions27.60LX18.70WX1.80H mm
WeightApprox. 1.33 +/- 0.2g
Durability5,000 cycles Min.
cONNECTION6 / 8 PIN, SMT Type

Technical characteristics

1. General Characteristics

Dimensions: 27.60LX18.70WX1.80H mm

Weight: Approx. 1.33±0.2g

Durability: 5,000 cycles Min.

2. Electrical Characteristics

Contact resistance: 50mΩ typical, 100mΩ Max.

Insulation resistance: >1000mΩ /500V DC

3. Solderability

IR reflow: 260℃.10Sec.Max

Manual soldering: 370℃.3Sec.Max

4. Environmental Characteristics

Operating temperature: -40℃~+85℃

Operating humidity: 10%~+95%RH

Request
Callback
Yes! I am interested

MUP-C781 Sim Card Holder

MUP-C781 Sim Card Holder
  • MUP-C781 Sim Card Holder
Ask For Price

Product Details:

Holder TypeMicro Slot, Nano Slot, MicroSD Slot
SIM SlotSingle SIM

Product Name: MUP-C781

Product specifications: SIM card connector

Product Description: Applications: intelligent monitoring terminal, wireless data communication systems, mobile phones, handheld POS machines, memory key management and other intelligent identification system.

1.6 PIN
2.SMT Type
3.DIM: 12.30Lx10.0Wx1.30Hmm
Request
Callback


Additional Information:

  • Item Code: MUP-C781
Yes! I am interested
View PDF

MUP-C783 Sim Card Holder

MUP-C783 Sim Card Holder
  • MUP-C783 Sim Card Holder
Ask For Price

Product Details:

Holder TypeMicro Slot, Nano Slot, MicroSD Slot
SIM SlotSingle SIM

Product Description:

Application: intelligent monitoring terminal, wireless data communication system, mobile phone, handheld POS machine, memory key management and other intelligent identification system, etc.

Product Specifications:

1. 6 PIN Nano Card
2. SMT Type (without post)
3. DIM: 13.30Lx10.60Wx1.35H mm
Request
Callback


Additional Information:

  • Item Code: MUP-C783
Yes! I am interested
View PDF

Lock Type MUP-M614 Micro SD Card Holder

Lock Type MUP-M614 Micro SD Card Holder
  • Lock Type MUP-M614 Micro SD Card Holder
Ask For Price
Micro SD Card Holder Lock Type MUP-M614

This is a Micro SD Card Holder of Push Push (Lock) Type.

Technical characteristics

1. General Characteristics
Dimensions: 14.50LX14.75WX1.85H mm
Weight: Approx. 0.45±0.2g
Durability: 5,000 cycles Min.

2. Electrical Characteristics
Contact resistance: 50mΩ typical, 100mΩ Max.
Insulation resistance: >1000mΩ /500V DC

3. Solderability
IR reflow: 260℃.10Sec.Max
Manual soldering: 370℃.3Sec.Max

4. Environmental Characteristics
Operating temperature: -40℃~+85℃
Operating humidity: 10%~+95%RH
Request
Callback
Yes! I am interested

MUP-C716IM Socket with Push Switch

MUP-C716IM Socket with Push Switch
  • MUP-C716IM Socket with Push Switch
Get Best Quote
Approx. Price: Rs 60 / Piece

Ever wanted to see what's on that SIM card? Use these sockets in your next project to interface to any SIM. 8-Pin standard connection. This is a surface mount socket, but it is large enough that it can be hand soldered. The push switch is be used to eject the SIM holder tray. Can also be used in industrial applications.

This is an equivalent part of Molex Part Number 91228 and 91236.

Request
Callback
Yes! I am interested
View PDF
X

Explore more products

Looking for “MUP Connectors”?


Reach Us
Dileep Jain (Manager)
399, 3rd Floor, Manek Chambers, Above Vasant Bhavan Restaurant Lamington Road
Mumbai- 400004, Maharashtra, India



Call Us

Share Us

F GT L


Send E-mailSend SMS