Rajguru ElectronicsRajguru Electronics


Our Products










Home » Our Products » Other Widgets

Other Widgets

We also have uart to wifi module, ENC28J60 Ethernet Module, MicroModule, PSoC Development Board and many more


Finger Print Module Output

Finger Print Module Output

Item Code: R305

R305 Fingerprint Module 
Description:

R305 Fingerprint Module is a serial fingerprint scanner which can be directly connected to the PC’s com port. R305 Fingerprint Sensor can easily be connected to any controller via MAX232 IC. This Fingerprint scanner is capable of storing and comparing the fingerprint and accordingly giving the desired output.

Fingerprint processing includes two parts: fingerprint enrollment and fingerprint matching (the matching can be 1:1 or 1: N). When enrolling, user needs to enter the finger two times. The system will process the two time finger images, generate a template of the finger based on processing results and store the template. When matching, user enters the finger through optical sensor and system will generate a template of the finger and compare it with templates of the finger library. For 1:1 matching, system will compare the live finger with specific template designated in the Module; for 1: N matching, or searching, system will search the whole finger library for the matching finger. In both circumstances, system will return the matching result, success or failure.

 

R305 Finger print Module Features:

  • Basic Power: 8-12v AC/DC
  • Interface: RS232.
  • Matching Mode: 1:1 and 1:N
  • Baud rate: 9600 – 115200. Default: 57600.
  • Storage Capacity: 256.
  • Average Search Time: <1sec
  • Image Acquire Time: <0.5sec.


Low-Cost Embedded UART-ETH-WIFI Module

Low-Cost Embedded UART-ETH-WIFI Module

Low cost UART-ETH-WIFI module. It can used to connect any microcontroller to internet/LAN.

Its a simple and cheap module for connecting the microcontroller using wifi. Its basically a Linux powered Router with serial port output.module is almost half price with base board.You need the base board only if you use the Ethernet cable. If you want to use wifi then there is no need for the base board. But if you are a beginner then better you buy with base board. But you can setup the module even without the base board. I am going to explain to setup the module without base board.

This module is a low cost embedded UART-ETH- WIFI Module (Serial port -Ethernet- wireless network) developed by Rajguru electronics.

This product is an embedded module based on the Universal serial interface network standard, built in TCP/IP protocol Stack. enabling the user serial port, Ethernet, Wireless Network (WiFi), interface between the conversions.

Through the module, the traditional serial devices do not need change any configuration; data can be transmitted through the internet network. Provide a quick solution for the user's devices to transfer data via ethernet.




Finger Print Module

Finger Print Module

With firm commitment to quality, we are manufacturing and exporting a comprehensive range of Finger Print Module to our customers. These products are manufactured using high grade quality raw material and advance technology procured from trusted and reliable vendor of the market.Optical biometric fingerprint reader with great features and can be embedded into a variety of end products, such as: access control, attendance, safety deposit box, car door locks

 

Features

  • Integrated image collecting and algorithm chip together, ALL-in-One
  • Fingerprint reader can conduct secondary development, can be embedded into a variety of end products
  • Low power consumption, low cost, small size, excellent performance
  • Professional optical technology, precise module manufacturing techniques
  • Good image processing capabilities, can successfully capture image up to resolution 500 dpi

 

Specifications:

 

  • Voltage DC 3.6 ~ 6.0v
  • Working Current 110mA Typical
  • Peak Current 140mA
  • Scanning Speed 0.3 Seconds
  • Matching Speed 1.0 Seconds 1:1000, Average speed
  • Scanning Window Surface 15X19mm
  • Matching Method 1:1 and 1:N
  • Character File Size: 256 Bytes
  • Storage Capacity: 120/350/880
  • Template Size: 512 Bytes
  • Security level: 5(low-high: 1, 2, 3, 4, 5)
  • False Acceptance Rate (FAR) < 0.001%
  • False Rejection Rate (FRR) < 0.1%
  • Interface UART TTL Logical Levelor Usb 1.1
  • Uart (9600N)bps: N=112 Default value N=6, That is 57600bps




Finger Print RG-513

Finger Print RG-513

This device is one chip module with;
- Finger pint algorithm.
- Optical sensor.

The major function are the following:-
- High accuracy and High speed finger print identification technology.
- Ultra-thin optical sensor.
- 1:1 verification, 1:N identification
- Downloading finger print image file from device.
- Reading & writing finger print template(s) from/to the device.
- Simple Uart & USB communication protocol.

Technical specification:-
- CPU:- ARM Cortex M3 core (Holtek HT32F2755)
- Sensor:- Optical sensor
- Image size:- 202x258 pixels
- 2000 numbers of maximum finger print.




Finger Print MiniUSB RG-513

Finger Print MiniUSB RG-513

This device is one chip module with;
- Finger pint algorithm.
- Optical sensor.

The major function are the following:-
- High accuracy and High speed finger print identification technology.
- Ultra-thin optical sensor.
- 1:1 verification, 1:N identification
- Downloading finger print image file from device.
- Reading & writing finger print template(s) from/to the device.
- Simple Uart & USB communication protocol.

Technical specification:-
- CPU:- ARM Cortex M3 core (Holtek HT32F2755)
- Sensor:- Optical sensor
- Image size:- 202x258 pixels
- 2000 numbers of maximum finger print.




Micro Module

Micro Module

Designed for OEM integration, Interlink's MicroModule pointing solutions The Micro Module is a finger-actuated "mouse" pointing module that provides complete 360-degree directional control and accurate speed control simultaneously. Users control direction by applying pressure in the direction of the desired movement and adjust the speed by altering the amount of pressure on the device.

Micro Module is ideal for computer cursor control in rugged mobile computers, hardened keyboards, navigation systems, machine control panels, pan and tilt controllers, motion controllers, CNC controllers and medical control equipment. It's a durable, maintenance-free "miniature" solution that works well in tight spaces and is capable of delivering "mouse" lifetimes of more than 3 million actuations. An integrated sealing rib also makes it possible to seal MicroModule into a system during installation.

Directional control is achieved by applying pressure in the direction of desired movement. Speed is controlled by altering the amount of applied pressure. The result is smooth cursor movement in any direction, from a precise crawl to a screen-crossing zip. VersaPoint technology has no moving parts to break or wear out, thus delivering reliable, trouble-free cursor control.

The device is available in both USB or PS/2 versions and three connecting cable options. For prolonged exposure to fuels, oils, solvents and aggressive fluids we offer a robust keypad option.

The most basic FSR consists of two membranes separated by a thin air gap. The air gap is maintained by a spacer around the edges and by the rigidity of the two membranes. One of the membranes has two sets of fingers which are interdigitated and electrically distinct; each set connects to one trace on the tail. The other membrane is coated with FSR ink. When the two layers are pressed together, the FSR ink shorts the two traces together with a resistance that depends on applied force.



 



Rajguru Electronics
Dileep Jain (Manager)
399 3rd Floor , Manek Chambers , Above Vasant Bhavan Restaurant , Lamington Road,
Mumbai - 400004, Maharashtra, India



Home  |  Profile  |  Our Products  |  Site Map  |  Contact Us  |   Mobile Site

Member IndiaMART.com © Rajguru Electronics. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited