Send Email
Send SMS

Rajguru ElectronicsRajguru Electronics
Send Email
Send SMS

Our Products

Home » Our Products » PICKIT Programmer

PICKIT Programmer

Under this catagory we offer PICKIT Programmer/Debugger manufactured by LOGIC POWER. We are stockiest and supplier of LOGIC POWER product. 

PICKIT2 Programmer/Debugger

PICKIT2 Programmer/Debugger
Approx. Price: Rs 1,400 / Piece

Item Code: PG164120

Description: The PICkit 2, Logic-Power, is a low cost development tool with an easy to use interface for programming and debugging Microchip's flash families of microcontrollers. The full featured Windows programming interface supports baseline (PIC10F, PIC12F5xx, PIC16F5xx), midrange (PIC12F6xx, PIC16F), PIC18F, PIC24, dsPIC30, dsPIC33, and PIC32 families of 8bit, 16bit, and 32bit microcontrollers, and many Microchip Serial EEPROM products. With Microchip's powerful MPLAB Integrated Development Environment (IDE) the PICkit 2 enables in circuit debugging on most PIC microcontrollers. In Circuit Debugging runs, halts and single steps the program while the PIC microcontroller is embedded in the application. When halted at a breakpoint, the file registers can be examined and modified.


• Full USB Speed only.
• Programmable Vpp & Programmable Vdd.
• Software OV/OI Protection.
• Simple Breakpoints, No Software Breakpoints.
• 128KB Program Image for On-The-Go programming.

• A to mini-B USB Cable.
• CD containing MPLAB IDE, Demo version C Compiler from CCS (PCM), PICkit 2 Debug Express Lessons, Webinars, Manuals & User Guides.

Note: This PICKit2 is manufactured in India by LOGIC POWER. LOGIC POWER is Manufacture of PICKit2, under license from Microchip, USA, for Indian Region.

PICKIT3 Debugger/Programmer

PICKIT3 Debugger/Programmer
Approx. Price: Rs 2,800 / Piece(s)

Item Code: PG164130

Description: The PICkit 3 allows debugging and programming of PIC and dsPIC Flash microcontrollers using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE) and it does this all at a most affordable price point. It can program a large range of PIC chips, including the PIC10F, 12F, 16F, PIC18F, 24F/H, dsPIC and PIC32 (future) families. Additionally it is firmware upgradeable, and Microchip regularly releases new firmware to support new PIC chips.
Logic Power PICkit 3 In-Circuit Debugger/Programmer uses in-circuit debugging logic incorporated into each chip with Flash memory to provide a low-cost hardware debugger and programmer. In-circuit debugging offers these benefits:

  • Low cost
  • Minimum of additional hardware needed for debug
  • Expensive sockets or adapters are not required
PICkit 3 Features
  • USB (Full speed 12 Mbits/s interface to host PC)
  • Real-time execution
  • MPLAB IDE compatible (free copy included)
  • Built-in over-voltage/short circuit monitor
  • Firmware upgradeable from PC/web download
  • Totally enclosed
  • Supports low voltage to 2.0 volts (2.0v to 6.0v range)
  • Diagnostic LEDs (power, busy, error)
  • Read/write program and data memory of microcontroller
  • Erase of program memory space with verification
  • Freeze-peripherals at breakpoint
  • Program up to 512K byte flash with the Programmer-to-Go
Note: This PICKit3 is manufactured in India by LOGIC POWER. LOGIC POWER is Manufacture of PICKit3, under license from Microchip, USA, for Indian Region.

PICKIT2 Programmer/Debugger with ZIF Socket

PICKIT2 Programmer/Debugger with ZIF Socket
Approx. Price: Rs 1,250 / Piece

Description: The pickit 2 is a low-cost in-circuit debugger (ICD) and in-circuit serial programmer(ICSP). Pickit 2 is intended to be used as an evaluation, debugging and programming aidIn a laboratory environment.

The Pickit 2 offers these features:
  • Real-time
  • single-step code execution
Breakpoints, Register and Variable Watch/Modify
  • In-circuit debugging
  • Target Vdd monitor
  • Diagnostic LEDs
  • MPLAB IDE user interface
  • USB interface to a host PC / USB POWERED
  • 40 Pin Target Board With FRC Cbale
  • ICSP FRC connecter Easy to interface to all our NSK boards
The Pickit 2 allows you to:
  • Debug your source code in your own application
  • Debug your hardware in real-time
  • Program a supported device using Microchip’s ICSP protocol through FRC cable supplied with this kit
Package Content
  • Pickit2 Programmer
  • Programming Adapter Board
  • USB Port Cable
  • Software CD ( ,Data sheets,Example Porograms,Manual , MPLAB IDE)
Note: This PICKIT2 is Manufactured By NSK Electronics(India).


Rajguru Electronics
Dileep Jain (Manager)
399 3rd Floor , Manek Chambers , Above Vasant Bhavan Restaurant, Lamington Road
Mumbai - 400004, Maharashtra, India

Contact via E-mail

Contact via SMS

Home  |  Profile  |  Our Products  |  Site Map  |  Contact Us

Member © Rajguru Electronics. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited