Leveraging on our extensive industrial experience, we are counted among the most eminent suppliers and traders of a technically advanced array ofRFID Reader & Card. Under this category we offer RFID Reader EM18 - Low Cost, RFID Reader - Serial Out, RFID Reader - Serial Out, RFID Reader - USB, RFID Reader & Writer 13.56MHz - Uart Interface, RFID Clamshell Card/TAG 125kHz, RFID Tag Keyfob (125kHz), MIfare Classic 1k Card 13.56MHzfor meeting varied application needs of the customers. All these products work on the modular technology and are highly capable of processing secret tags & codes in readable data.
Description: This RFID Reader Module 125Khz is eary to use. It is Low Cost. It gives Serial and Wiegand26 Output.
Description: This board uses the EM18 RFID Module. It can be used to read our RFID cards. Using the board with micro controllers to read a card's data is very simple and required just a serial connection. The board should be powered at 5V, and it requires a direct connection to the micro controller's Serial Rx pin. The card data is transmitted over the serial line when the card is brought near the module.
The board has an onboard power indication LED, a LED and Buzzer to indicate the presence of a RFID Card. All the IO pins are brought out to standard clearly labeled header pins, which simplify prototyping time and effort. An output pin (DET) also indicates the presence of a RFID card. The board can also be used to output data in Wiegand format. It can detect cards in the range of 8-10cm.
Description: This is a plug and play RFID Reader USB. It can be used to read our 125kHz based RFID cards. Just connect the reader to the USB port and it creates a new COM Port on the computer. When a RFID card is brought near the Reader, the card's data is output using in ASCII through a simple USART interface. Since most programming languages allow access to COM ports, it is simple to write custom software programs to read RFID cards and process them as required. This board can also be used with microcontrollers to read card data. This reader is perfect for developing RFID based products and projects.
The reader has an onboard power indication LED, a LED and Buzzer to indicate the presence of a RFID Card. The reader can also be used to output data in Wiegand format. It can detect cards in the range of 4 - 7cm.
This RFID Reader & Writer 13.56MHz - Uart Interface is integrated with 8bit microcontroller, analog and digital signal processor and necessary passive components on both top layer to complete a fully Functional Read/Write Module. This is a compact 13.56MHz RFID Read / Write Module Designed For IS014443A standard and Support 1k, 4k Transponders. It is controlled by external device over Uart with simple protocols defined in Datasheet.
Description: This is a basic VLF RFID Clamshell Card/Tag used for presence sensing, Aceess Control etc. Works in the 125kHz RF range. These tags come with a unique 32-bit ID and are not re-programmable. Card is blank, smooth, and mildly flexible.
RFID Clamshell Card (125kHz) Features:
RFID Tag Keychain (125kHz) Features: