Rajguru Electronics
Rajguru Electronics
Lamington Road, Mumbai, Maharashtra
SEND SMS
SEND EMAIL

Servo Motor

We are leading supplier and trader in Servo Motor. Under this catagory we offeryou a complete choice of products which include Servo Motor such as Metal Micro Servo Motor VS 5M, Standard Analog Servo Motor RG-08A, Standard Analog Servo Motor RG-08B, Standard Analog Servo Motor RG-2, High Torque Metal Gear Standard Analog Servo RG-11 and SG90 9G Micro Servo Motor.

Standard Analog Servo Motor RG-2

Standard Analog Servo Motor RG-2
  • Standard Analog Servo Motor RG-2
Get Best Quote
Approx. Price: Rs 400 / Piece(s)

Description: This is 36g standard analog servo, metal brush motor, nylon gear, dual ball bearing, JR connector.

 

Model:RG-2
Type:standard analog servo
Volts:4.8V6V
Torque:2.8kg-cm (38.9 oz-in)3.0kg-cm (41.7 oz-in)
Speed:0.20sec/60deg0.18sec/60deg
Weight:36g (1.27 oz)
Dimensions:40.8*20.1*38.0mm (1.61*0.79*1.49")
Features:metal brush motor, nylon gear, 2BB, JR connector

 

    Request
    Callback


    Additional Information:

    • Item Code: RG-2
    Yes! I am interested

    Standard Analog Servo Motor RG-08A

    Standard Analog Servo Motor RG-08A
    • Standard Analog Servo Motor RG-08A
    Get Best Quote
    Approx. Price: Rs 425 / Piece(s)

    Description: This is 40g standard analog servo, metal brush motor, nylon gear, dual ball bearing, JR connector.

     

    Model:RG-08A
    Type:standard analog servo
    Volts:4.8V6V
    Torque:6.3kg-cm (87.5 oz-in)7kg-cm (97.2 oz-in)
    Speed:0.22sec/60deg0.19sec/60deg
    Weight:40g (1.41 oz)
    Dimensions:40.8*20.1*38.0mm (1.61*0.79*1.49")
    Features:metal brush motor, nylon gear, 2BB, JR connector

     

    Request
    Callback


    Additional Information:

    • Item Code: RG-08A
    Yes! I am interested

    Standard Analog Servo Motor RG-08B

    Standard Analog Servo Motor RG-08B
    • Standard Analog Servo Motor RG-08B
    Get Best Quote
    Approx. Price: Rs 400 / Piece(s)

    Description: This is 36g standard analog servo, metal brush motor, nylon gear, dual ball bearing, JR connector.

     

    Model:RG-08B
    Type:standard analog servo
    Volts:4.8V6V
    Torque:2.8kg-cm (38.9 oz-in)3.0kg-cm (41.7 oz-in)
    Speed:0.20sec/60deg0.18sec/60deg
    Weight:36g (1.27 oz)
    Dimensions:40.8*20.1*38.0mm (1.61*0.79*1.49")
    Features:metal brush motor, nylon gear, 2BB, JR connector
    Request
    Callback


    Additional Information:

    • Item Code: RG-08B
    Yes! I am interested

    High Torque Metal Gear Standard Analog Servo RG-11

    High Torque Metal Gear Standard Analog Servo RG-11
    • High Torque Metal Gear Standard Analog Servo RG-11
    Get Best Quote
    Approx. Price: Rs 750 / Piece(s)

    Description: This is High torque standard analog servo, metal brush motor, metal gear, dual ball bearing, JR connector.

    Model:RG-11
    Type:standard analog servo
    Volts:4.8V6V
    Torque:13.2kg-cm (183.3 oz-in)15kg-cm (208.3 oz-in)
    Speed:0.20sec/60deg0.18sec/60deg
    Weight:55g (1.94 oz)
    Dimensions:40.8*20.1*38.0mm (1.61*0.79*1.49")
    Features:metal brush motor, metal gear, 2BB, JR connector

     

      Request
      Callback


      Additional Information:

      • Item Code: RG-11
      Yes! I am interested

      SG90 9G Micro Servo Motor

      SG90 9G Micro Servo Motor
      • SG90 9G Micro Servo Motor
      Get Best Quote
      Approx. Price: Rs 200 / Piece(s)

      Description: The SG90 mini servo is lightweight, high-quality and lightning-fast. The servo is designed to work with almost all the radio control systems. It is with excellent performance and high torque of 1.5kg cm gives you the freedom to use it for a variety of projects. The SG90 mini servo with accessories is perfect for R/C helicopter, plane, car, boat and truck use.

      Specifications:
      • Dimensions: 22 x 11.5 x 27mm
      • Operating Speed (4.8V no load): 0.12sec/60 degrees
      • Stall Torque: 1.2kg / 42.3oz(4.8V); 1.6 kg / 56.4oz (6.0V)
      • Temperature Range: -30 to +60 Degree C
      • Dead Band Width: 7usec
      • Operating Voltage:3.0-7.2 Volts
      • SG90 Micro Servo
      • All Nylon Gear
      • Connector Wire Length 150mm
      • Weight: 0.015 kg
      Request
      Callback
      Yes! I am interested

      Servo Motor Mg995

      Servo Motor Mg995
      • Servo Motor Mg995
      Get Best Quote
      Approx. Price: Rs 400 / Piece(s)

      These have bags of torque, a digital amplifier and are almost bulletproof. So will be great for buggies and cars.

      Features:

      • All Metal Gears.
      • Double Ball Bearings.
      • Compliant with most standard receiver connector: Futaba, Hitec, Sanwa, GWS etc....
      • Great for truck, Boat, Racing Car, Helicopter and Aeroplane.
      • Power Supply: Through External Adapter.
      • Stable and Shock Proof.
      • Core-less Motor.

      Specifications:

      • Connector Wire Length: 300mm.
      • Dimension: 40mm x 19mm x 43mm.
      • Weight: 55g.
      • Operating Speed: 0.17sec / 60 degrees (4.8V no load).
      • Operating Speed: 0.13sec / 60 degrees (6.0V no load).
      • Stall Torque: 13 kg-cm (180.5 oz-in) at 4.8V.
      • Stall Torque: 15 kg-cm (208.3 oz-in) at 6V.
      • Operation Voltage: 4.8 - 7.2Volts.
      • Connector Wire: Heavy Duty, 11.81" (300mm).
      Request
      Callback
      Yes! I am interested

      Servo Motor Mg996r

      Servo Motor Mg996r
      • Servo Motor Mg996r
      Get Best Quote
      Approx. Price: Rs 400 / Piece(s)

      Specifications:

      • Great for truck, Boat, Racing Car, Helicopter and Airplane.
      • Power Supply: Through External Adapter.
      • Stable and Shock Proof. - Metal Gear - Double Ball Bearing - Connector Wire Length 300mm
      • Dimension : 40mm x 19mm x 43mm
      • Weight : 55g
      • Operating Speed : 0.17sec / 60 degrees (4.8V no load)
      • Operating Speed : 0.13sec / 60 degrees (6.0V no load)
      • Stall Torque : 13 kg-cm (180.5 oz-in) at 4.8V
      • Stall Torque : 15 kg-cm (208.3 oz-in) at 6V
      • Operation Voltage : 4.8 - 7.2Volts
      • Gear Type: All Metal Gears
      • Connector Wire: Heavy Duty, 11.81" (300mm)
      Request
      Callback
      Yes! I am interested

      Servo Motor S3003

      Servo Motor S3003
      • Servo Motor S3003
      Get Best Quote
      Approx. Price: Rs 300 / Piece(s)
      Control System: Pulse Width Control 1520usec Neutral
      Required Pulse: 3-5 Volt Peak to Peak Square Wave
      Operating Voltage: 4.8-6.0 Volts
      Operating Temperature Range: -20 to 60 Degree C
      Operating Speed (4.8V): 0.23sec/60 degrees at no load
      Operating Speed (6.0V): 0.19sec/60 degrees at no load
      Stall Torque (4.8V): 44 oz/in. (3.2kg.cm)
      Stall Torque (6.0V): 56.8 oz/in. (4.1kg.cm)
      Operating Angle: 45 Deg. one side pulse traveling 400usec
      Continuous Rotation Modifiable: Yes
      Direction: Counter Clockwise/Pulse Traveling 1520-1900usec
      Current Drain (4.8V): 7.2mA/idle
      Current Drain (6.0V): 8mA/idle
      Motor Type: 3 Pole Ferrite
      Potentiometer Drive: Indirect Drive
      Bearing Type: Plastic Bearing
      Gear Type: All Nylon Gears
      Connector Wire Length: 12"
      Dimensions: 1.6" x 0.8"x 1.4" (41 x 20 x 36mm)
      Weight: 1.3oz. (37.2g)
      Request
      Callback
      Yes! I am interested

      MG90 Tower Pro Micro Servo Motors

      MG90 Tower Pro Micro Servo Motors
      • MG90 Tower Pro Micro Servo Motors
      Get Best Quote
      Approx. Price: Rs 300 / Piece(s)
      Product Description

      The MG90 is a nice small RC servo ideal for projects where size and weight are important.
      RC servos are hobbyist remote control servos typically used in radio-controlled models, where they provide actuation for various mechanical systems such as the steering of a car, the flaps on a plane, or the rudder of a boat. These servos are not industrial grade and are not recommended for continuous heavy use.

      Specification:
      Modulation:Analog
      Torque:4.8V: 30.6 oz-in (2.20 kg-cm)
      6.0V: 34.7 oz-in (2.50 kg-cm)
      Speed:4.8V: 0.11 sec/60°
      6.0V: 0.10 sec/60°
      Dimensions:23.1mm x 12.2 x 29mm
      Operating voltage:4.2-6V
      Gear Type:Metal
      Rotation/Support:Dual Bearings
      Request
      Callback
      Yes! I am interested

      Servo Motor 3.7g Mini

      Servo Motor 3.7g Mini
      • Servo Motor 3.7g Mini
      Get Best Quote
      Approx. Price: Rs 250 / Piece

      Specifications:

      • Size: (L * W * H): 20.0 * 17.6 * 8.0mm
      • Voltage: 4.8 ~ 6.0V
      • Speed: 0.12sec/60o (no load)
      • Torque: 0.4kg. cm
      • Operating Current: 100mA
      • Quiescent current: 1mA
      • The width of the dead zone: 10uses
      • Cable length: 165mm
      • Weight: 3.7g (less connector)
      Request
      Callback
      Yes! I am interested

      PCA9685 16-Channel 12-Bit PWM Servo Driver

      PCA9685 16-Channel 12-Bit PWM Servo Driver
      • PCA9685 16-Channel 12-Bit PWM Servo Driver
      Get Best Quote
      Approx. Price: Rs 300 / No

      Features

      • Contain an I2C-controlled PWM driver with a built-in clock. It means, unlike the TLC5940 family, you do not need to continuously send it signals tying up your microcontroller; it's completely free running! 
      • 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs (this is good when you want to control white or blue LEDs with 3.4+ forward voltages) 
      • Support using only two pins to control 16 free-running PWM outputs – you can even chain up 62 breakouts to control up to 992 PWM outputs
      • 3 pin connectors in groups of 4, so you can plug in 16 servos at one time (Servo plugs are slightly wider than 0.1" so you can only stack 4 next to each other on 0.1" header
      • 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate


      Technical Details

      Introduction
      PCA9685 16-Channel 12-Bit PWM Servo Driver can help a lot when there are insufficient PWM output pins for the MCU in your project. The only condition is that the main control chip supports I2C communication, which means enabling the communication between the chip and PCA9685, so as to control multiple servos simultaneously. 

      Request
      Callback
      Yes! I am interested

      ADS1015 12-Bit ADC - 4 Channel with Programmable Gain

      ADS1015 12-Bit ADC - 4 Channel with Programmable Gain
      • ADS1015 12-Bit ADC - 4 Channel with Programmable Gain
      Get Best Quote
      Approx. Price: Rs 300 / Piece
      ADS1015 12-Bit ADC - 4 Channel with Programmable Gain Amplifier

      For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1015 provides 12-bit precision at 3300 samples/second over I2C. The chip can be configured as 4 single-ended input channels, or two differential channels. As a nice bonus, it even includes a programmable gain amplifier, up to x16, to help boost up smaller single/differential signals to the full range. We like this ADC because it can run from 2V to 5V power/logic, can measure a large range of signals and its super easy to use. It is a great general purpose 12 bit converter.

       

      Technical details
      • Wide supply range: 2.0v to 5.5v
      • Low current consumption: continuous mode: only 150µa single-shot mode: auto shut-down
      • Programmable data rate: 128sps to 3.3ksps
      • Internal low-drift voltage reference
      • Internal oscillator
      • Internal pga
      • I2c interface: pin-selectable addresses
      • Four single-ended or two differential inputs
      • Programmable comparator
      • This board/chip uses i2c 7-bit addresses between 0x48-0x4b, selectable with jumpers
      Request
      Callback
      Yes! I am interested
      Looking for “Servo Motor”?


      Reach Us
      Dileep Jain (Manager)
      399 3rd Floor , Manek Chambers , Above Vasant Bhavan Restaurant Lamington Road
      Mumbai- 400004, Maharashtra, India


      Call Us

      Send E-mail

      Send SMS