RajGuru ElectronicsRajGuru Electronics
Home Profile Our Products Contact Us

Our Products

Simcom GSM-GPRS Module

GSM-GPRS

GPS Receiver

SMA Connector

Antenna

Zigbee & XBee Module

Bluetooth Module

RFID Reader & Card

Speech Recognition HM2007 & Voice Recording IC

Sensors

Flex & Force Sensor

Gas Sensors

Humidity and Temperature Sensor

Infrared Proximity Sensor

Accelerometers Sensor

Potentiometer Sensor

Single Board Computer

Raspberry PI

Arm9 S3C2440 Single Board Computer

Arm11 6410 S36410 Board SBC

FriendlyArm Board Accessories

Arm7 LPC2148 Development Board

Development Board

PIC Development Board

USB ISP Programmer

PICKIT Programmer

Universal IC Programmer

Wireless RF Transreceiver Module

Freeduino Board

Transmitter & Receiver

Robotics Accessories

Servo Motor

Colour Camera

Other Widgets

Low-Cost Embedded UART-ETH-WIFI Module

UART To Wi Fi Module

Finger Print Module

Finger Print Module Output

Cables and Convertors

Display & LCD

Thermal Printer

MicroModule

Brushless Motor - ESC - Proproller Fan

mp3 module

thermoelectric module

Other Widgets

Share: FacebookTwitterStumbleupon
We also have uart to wifi module, ENC28J60 Ethernet Module, MicroModule, PSoC Development Board and many more


Click here to Zoom Low-Cost Embedded UART-ETH-WIFI Module


Download




Low-Cost Embedded UART-ETH-WIFI Module

Low cost UART-ETH-WIFI module. It can used to connect any microcontroller to internet/LAN.

Its a simple and cheap module for connecting the microcontroller using wifi. Its basically a Linux powered Router with serial port output.module is almost half price with base board.You need the base board only if you use the Ethernet cable. If you want to use wifi then there is no need for the base board. But if you are a beginner then better you buy with base board. But you can setup the module even without the base board. I am going to explain to setup the module without base board.

This module is a low cost embedded UART-ETH- WIFI Module (Serial port -Ethernet- wireless network) developed by Rajguru electronics.

This product is an embedded module based on the Universal serial interface network standard, built in TCP/IP protocol Stack. enabling the user serial port, Ethernet, Wireless Network (WiFi), interface between the conversions.

Through the module, the traditional serial devices do not need change any configuration; data can be transmitted through the internet network. Provide a quick solution for the user's devices to transfer data via ethernet.

Click here to Zoom UART To Wi Fi Module


Download




UART To Wi Fi Module

We are one of the leading suppliers and traders of UART To Wi Fi Module. Our range of product-line is a complete ultra low power embedded TCP/IP solution. These are manufactured using high-grade raw materials and are procured from trusted vendors and are provided after in-depth research regarding the market trends and clients demands.

 

Following are the main functions of the product-line offered by our organization:

 

  • Support for UART data serial, four baud rate options: 19200 / 38400 / 57600 / 115200bps.
  • Wireless data rates support the 802.11b Standard, the maximum rate is 11Mbps.
  • Integrate the functions of 802.11 MAC protocol Softwares.
  • Support for the STA appliances in the Infrastructure Network.
  • Support for the Open/WEP mode authentication.
  • Support for the wep64/wep128/ccmp/wpi data encryption transmission in the shared key mode
  • Support for the automatic networking mode and manual networking mode.
  • In the automatic networking modethe module can automatically scan the target network, and automatically connect when disconnection.
  • In the manual networking modeoperation of connect and disconnect is touched off by orderthis supports a flexible control space.
  • Support the network data transmission in RAW/UDP/TCP format.
  • Support seven groups of the basic parameters set,and can connect to seven target networks the most.
  • Support to Con fig. the parameters through user serial.
  • Support to upgrade the fire-ware on line by the Internet.

Integrate the functions of 802.11 MAC protocol software

  • Support the STA applications in the infrastructure network
  • Support the OPEN/WEP mode authentication
  • Support the WEP64/WEP128/CCMP/WPI data encryption transmission in the shared key mode

Support automatic networking mode and manula networking mode

  • In the automatic networking mode, the module can automatically scan the target network, and automatically connect when disconnected.
  • In the manual networking mode, operation of connection and disconnection is done manually. This supports a flexible requirement.

Finger Print Module


Download




Finger Print Module

With firm commitment to quality, we are manufacturing and exporting a comprehensive range of Finger Print Module to our customers. These products are manufactured using high grade quality raw material and advance technology procured from trusted and reliable vendor of the market.Optical biometric fingerprint reader with great features and can be embedded into a variety of end products, such as: access control, attendance, safety deposit box, car door locks

 

Features

  • Integrated image collecting and algorithm chip together, ALL-in-One
  • Fingerprint reader can conduct secondary development, can be embedded into a variety of end products
  • Low power consumption, low cost, small size, excellent performance
  • Professional optical technology, precise module manufacturing techniques
  • Good image processing capabilities, can successfully capture image up to resolution 500 dpi

 

Specifications:

 

  • Voltage DC 3.6 ~ 6.0v
  • Working Current 110mA Typical
  • Peak Current 140mA
  • Scanning Speed 0.3 Seconds
  • Matching Speed 1.0 Seconds 1:1000, Average speed
  • Scanning Window Surface 15X19mm
  • Matching Method 1:1 and 1:N
  • Character File Size: 256 Bytes
  • Storage Capacity: 120/350/880
  • Template Size: 512 Bytes
  • Security level: 5(low-high: 1, 2, 3, 4, 5)
  • False Acceptance Rate (FAR) < 0.001%
  • False Rejection Rate (FRR) < 0.1%
  • Interface UART TTL Logical Levelor Usb 1.1
  • Uart (9600N)bps: N=112 Default value N=6, That is 57600bps

Click here to Zoom Finger Print Module Output




Finger Print Module Output

Item Code: R305

R305 Fingerprint Module 
Description:

R305 Fingerprint Module is a serial fingerprint scanner which can be directly connected to the PC’s com port. R305 Fingerprint Sensor can easily be connected to any controller via MAX232 IC. This Fingerprint scanner is capable of storing and comparing the fingerprint and accordingly giving the desired output.

Fingerprint processing includes two parts: fingerprint enrollment and fingerprint matching (the matching can be 1:1 or 1: N). When enrolling, user needs to enter the finger two times. The system will process the two time finger images, generate a template of the finger based on processing results and store the template. When matching, user enters the finger through optical sensor and system will generate a template of the finger and compare it with templates of the finger library. For 1:1 matching, system will compare the live finger with specific template designated in the Module; for 1: N matching, or searching, system will search the whole finger library for the matching finger. In both circumstances, system will return the matching result, success or failure.

 

R305 Finger print Module Features:

  • Basic Power: 8-12v AC/DC
  • Interface: RS232.
  • Matching Mode: 1:1 and 1:N
  • Baud rate: 9600 – 115200. Default: 57600.
  • Storage Capacity: 256.
  • Average Search Time: <1sec
  • Image Acquire Time: <0.5sec.





Contact Us

RajGuru Electronics
Mr. Dileep Jain (Manager)
3F, 3rd Floor, Manik Chambers, Above Vasant Bhavan Hotel, Lamington Road
Mumbai - 400004, Maharashtra, India

Contact via E-mail



Home  |  Profile  |  Our Products  |  Trade Offers (7)  |  Site Map  |  Contact Us

Member IndiaMART.com © RajGuru Electronics. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited