Electronic Modules

Product Details:

The AD-013 fingerprint sensor module is consist from a fingerprint sensor & a MCU. The module provide one UART interface output port for connecting to customer side main board.

The AD-013 sets itself apart from other finger print scanners with the ability to read a fingerprint's image by pixel array and delivering ridge or valley signals to the A/D converter and digital processor, then to the serial peripheral interface for data-reading. The on-board MCU uses a fingerprint algorithm allowing you, through UART, to use MCU SOC commands to operate module like fingerprint enroll, match operations, and more.

The AD-013 features an image resolution of 508dpi, a recognition time of less than 0.6 seconds, and can store up to 40 high quality templates. Unlike other fingerprint scanners, this version includes an an interface cable with a 6-pin male hook-up output that attaches to the connection port for easy set-up and assembly.

Features:

• 160x160 Pixels
• Built-in ADC for Digitizing Image
• UART Interface
• Data encryption
• Short Readout Time

Additional Information:

• Item Code: AD-013

Product Details:

This Voice Recognition Module is a compact and easy-control speaking recognition board. This product is a speaker-dependent voice recognition module. It supports up to 80 voice commands in all. Max 7 voice commands could work at the same time. Any sound could be trained as command. Users need to train the module first before let it recognizing any voice command. This board has 2 controlling ways: Serial Port (full function), General Input Pins (part of function). General Output Pins on the board could generate several kinds of waves while corresponding voice command was recognized.

Parameters

• TTL level UART interface
• Analog Interface: 3.5mm mono-channel microphone connector + microphone pin interface

Product Details:

Feature:

 

• Simple UART & USB communication protocol
• Complies with USB 2.0 full-speed (12Mbps) specification
• Ultra-thin Optical Sensor
• Resolution 450 DPI
• 200/3000 fingerprints storage
• Wake up on Finger Function
• Works well with dry, moist or rough fingerprints
• Anti-Scratch with surface high hardness??? 5H
• 1:1 verification, 1:N identification
• Reading & writing fingerprint template(s) from/to the device
• High-accuracy and high-speed fingerprint identification technology
• Downloading fingerprint image from the device
• Convenient & Safe & Facilitation—Just one touch and easy to enroll

Product Details:

Fingerprint Module consists of optical fingerprint sensor, high-speed DSP processor, high-performance fingerprint alignment algorithm, high-capacity FLASH chips and other hardware and software composition, stable performance, simple structure, with fingerprint entry, image processing, fingerprint matching, search and template storage and other functions.

Additional Information:

• Item Code: GT-521F32

Product Details:

This Serial JPEG Color Camera module is a compact size, low power consumption, and stable operation. 5.0V DC Supply. UART: Up to 115200bps for transferring JPEG images. The camera uses the advanced Omni Vision OV7725 VGA color sensor JPEG CODEC for different resolutions. The camera also features down sampling, clamping and windowing circuits for VGA, QVGA, and no need for external DRAM. The use of the Omni Vision CMOS VGA color sensor makes this a low powered consumption unit.

The interface of this module is using RS232 protocol. If you are planning to use it with MCU UART then add a MAX232 Interface between this camera and your MCU so that conversion can be made between UART level of MCU which usually works at 5V and RS232 level of camera.

Specification:

• Communication interface/protocol: RS232
• VGA/QVGA/160x120 resolution
• Support capture JPEG from serial port
• Default baud rate of serial port is 115200

Additional Information:

• Item Code: RG-CAM-1

Product Details:

Fingerprint Module consists of optical fingerprint sensor, high-speed DSP processor, high-performance fingerprint alignment algorithm, high-capacity FLASH chips and other hardware and software composition, stable performance, simple structure, with fingerprint entry, image processing, fingerprint matching, search and template storage and other functions.

Additional Information:

• Item Code: R-307

Product Details:

Product description:

• 8 channels input

• Logical light indication: a small light indicate CHO electrical level;
• Input feature: 5PF, 100K Ohm;
• USB power supply;
• Sampling rate can be seted as below: 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz;

• Data upload real time,the max of depth of collection is 10T,far from practical need.

Product Details:

About 4 wire resistive touch screen mux break out baord, can be used with any graphical lcd in the back groung, features and usage vcc 5v out put: analog by touching the screen on any given point, you will get analog voltage on the corresponding axis. "x" axis: moving from left to right the voltage remains constant and moving from top to bottom the voltage varies, (select pin should be active heigh). "y" axis: moving from top to bottom the voltage remains constant and moving from left to right the voltage varies, (select pin should be active low). To get the accurate measuring axis of x and y, follow the instructions below: to get "y" axis data output: select pin should be ground to get "x" axis data output: select pin should be tied to vcc toggle select pin to heigh and low pulses to get "x" & "y" axis data correspondingly and get the out put analog volates of the corresponding axis. Inclusions 1 x 4 wire resistive touch screen mux break out board

 

Product Details:

Additional Information:

• Item Code: digital-dual-usb-5v-18560
• Delivery Time: 8-10 Days