Rajguru Electronics (I) Private Limited
Rajguru Electronics (I) Private Limited
Lamington Road, Mumbai, Maharashtra
SEND SMS
SEND EMAIL

Electronic Motor & ESC

Offering you a complete choice of products which include tb6560 stepper motor driver board 3a, bts7960 43a h-bridge stepper motor driver module, nodemcu esp8266-12 cp2102 based with motor driver, tb6600 4.5a stepper motor driver, d2826-1800kv brushless motor and brushless motor d2826-1100kv.

TB6560 Stepper Motor Driver Board 3A

TB6560 Stepper Motor Driver Board 3A
  • TB6560 Stepper Motor Driver Board 3A
  • TB6560 Stepper Motor Driver Board 3A
  • TB6560 Stepper Motor Driver Board 3A
Get Best Quote
Approx. Price: Rs 445 / PieceGet Latest Price

Product Details:

Excitation ModeSynchronizing, half step, 1/8 step, 1/16 step, a maximum of 16 segments.
Volume50 x 75 x 35 ( mm)
Optocoupler used6N137 high-speed Opto-Coupler
Model Name/NumberTB6560
Operating voltageDC 10V-35V
Rated output+ / - 3A ,peak 3.5A.

CNC Router Single Axis 3A Stepper Motor driver board is for axis control with Input signal high-speed opto-coupler isolation, large heat sink to ensure good heat dissipation. Stepper motor driver is Semi-flow mode adjustable, semi-flow current adjustable,with a variety of semi-flow model and semi-flow current setting functions.

Technical specifications & features:

  • Very easy to use, no instructions, all of use are marked on the board
  • With large heat sink to ensure good heat dissipation
  • Input signal high-speed opto-coupler isolation, guarantee not losing steps
  • Semi-flow mode adjustable, semi-flow current adjustable, not the general design on the market, with a variety of semi-flow model and semi-flow current setting function
  • Attenuation model adjusted for all the motors can be locked when no noise
  • 6N137 high-speed Opto-Coupler , to ensure a high speed without step out.
  • New original Toshiba TB6560AHQ chip, low-voltage shutdown, of overheating parking and over-current protection circuit to ensure optimal performance.
  • For 42,57,86 Stepper within 3A 2/4 -phase / 4 wire / 6 wire stepper motor, not fit for more than 3A stepper motor.
  • The Automatic half-decay adjustable.
  • Excitation Mode: synchronizing, half step, 1/8 step, 1/16 step, a maximum of 16 segments.
  • The current level adjustable to meet your various application needs.
  • Thick tooth radiators, good heat dissipation.

 

Request
Callback
Yes! I am interested

BTS7960 43A H-Bridge Stepper Motor Driver Module

BTS7960 43A H-Bridge Stepper Motor Driver Module
  • BTS7960 43A H-Bridge Stepper Motor Driver Module
  • BTS7960 43A H-Bridge Stepper Motor Driver Module
  • BTS7960 43A H-Bridge Stepper Motor Driver Module
  • BTS7960 43A H-Bridge Stepper Motor Driver Module
Get Best Quote
Approx. Price: Rs 575 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Voltage5.5V to 27V
Input TypeDC
Input Frequency25kHZ
SizeApprox. 4 x 5 x 1.2 cm / 1.57x1.97x0.47inch
MaterialPlastic
Model Name/NumberBTS7960

Double BTS7960 43A H-bridge High-Power Stepper Motor Driver Module Arduino for Arduino/Robotics

This driver uses Infineon chips BTS7960 composed of high power drive full H-bridge driver module with thermal over current protection. Double BTS 7960 H-bridge driver circuit, with a strong drive and braking, effectively isolating the microcontroller and motor driver! High current 43A.

Features of Double BTS7960 43A H-bridge High-Power Stepper Motor Driver Module:
  • Double BTS7960 large current (43A) H-Bridge motor driver.
  • 5v isolate with MCU, and effectively protect MCU.
  • Can solder heat sink.

Applications of Double BTS7960 43A H-bridge High-Power Stepper Motor Driver Module:
  • DIY projects.
  • Robotics projects.
  • Arduino projects.
  • Raspberry-Pi projects.
  • Electrical/Electronic projects.
Request
Callback
Yes! I am interested
View PDF

Nodemcu ESP8266-12 CP2102 Based with Motor Driver

Nodemcu ESP8266-12 CP2102 Based with Motor Driver
  • Nodemcu ESP8266-12 CP2102 Based with Motor Driver
  • Nodemcu ESP8266-12 CP2102 Based with Motor Driver
  • Nodemcu ESP8266-12 CP2102 Based with Motor Driver
Get Best Quote
Approx. Price: Rs 495 / PieceGet Latest Price

Product Details:

NameESP-12E motor shield
Voltage for motor4.5V to 36V
Voltage for ESP control board4.5V to 9V
Driver chipL293D
Model Name/NumberESP8266-12 CP2102
ColorBlack
Packaging TypeBox

ESP12E Motor Shield is a high-current motor drive module compatible with ESP12E Dev Kit and . The module is designed with a plug-in board and can be directly connected to the ESP12E Dev Kit or NodeMCU Lua module.


The module adopts the excellent high-power motor dedicated full-bridge chip L293DD produced by STMicroelectronics. It can directly drive 2 DC motors or 1 stepping motor, and the driving current can reach 1.2A. The layout of the circuit diagram is reasonable, the package is packaged and the installation is very convenient.


The module uses the IO port of the ESP12E Dev Kit as the control port, and the internal logic chip completes the motor IC drive. Therefore, it only occupies four ports of the control boards D1, D2, D3, and D4, which are respectively used as PWMA (motor A speed) and PWMB (motor B). Speed), DA (Motor A direction), DB (Motor B direction) function.


The module also draws multiple pins such as VIN, 3.3V, DIO, AIO, SDIO, UART, SPI, RST, EN, etc., which can be easily connected to various sensors (temperature and humidity, buzzer, illumination, relay, etc.).


The module adopts a user-friendly design scheme, and the power button switch allows the user to conveniently switch the power.


This module can be used directly to control smart cars.

 

Request
Callback
Yes! I am interested

TB6600 4.5A Stepper Motor Driver

TB6600 4.5A Stepper Motor Driver
  • TB6600 4.5A Stepper Motor Driver
  • TB6600 4.5A Stepper Motor Driver
  • TB6600 4.5A Stepper Motor Driver
  • TB6600 4.5A Stepper Motor Driver
Get Best Quote
Approx. Price: Rs 581 / PieceGet Latest Price

Product Details:

Rated maximum output reached+/- 4.5A
SubdivisionFull Step, Half Step, 1/4-step, Step 1/8, 1/16-step, Up To 16 Segments.
ApplicationFor 4.2A 42,57,86 within the two-phase / four-phase / four-wire / six-wire stepper motor.
MaterialABS
Model Name/NumberTB6600
Usage/ApplicationIndustrial
Packaging TypeBox

TB6600 stepper motor driver provides maximum 4.5A output current. TB6600 comes with output sort-circuit protection, Low-Pressure shut-off, Overheating parking and over-current protection. Output current is infinitely adjustable to meet various applications. Features:

  • High current, high voltage TB6600HG new original chip, there are low-pressure shut-off, overheating parking and over-current protection circuit, short-circuit protection and increased compared to TB6560
  • High-speed optical coupling 6N137, ensure high speed without losing step
  • The output current is infinitely adjustable to meet various application requirements
  • Automatic half current function. And a semi-automatic flow switch, easy to use
  • The use of high-speed optical coupling 6N137 ensure high-speed without losing step
  • Printed on the back panel are subdivided setup instructions
  • Used to increase the heat sink, good heat dissipation
  • Output short-circuit protection
  • Using common anode input mode, there are two input terminals, wiring more convenient

 

Request
Callback
Yes! I am interested

D2826-1800KV Brushless Motor

D2826-1800KV Brushless Motor
  • D2826-1800KV Brushless Motor
Get Best Quote
Approx. Price: Rs 808 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Voltage1800 V
Power342 W
Pull960gm
Motor size28x26
Battery7.4-11.1V
ESC40A

D2826 is a brushless motor with KV ratting of 1800. Brushless motors are synchronous motors which are powered by a DC electric source via an integrated inverter/switching power supply, which produces an AC electric signal to drive the motor. In this context, AC, alternating current, does not imply a sinusoidal waveform, but rather a bi-directional current with no restriction on waveform. Note: D2826-1800kV is a Short shaft BLDC motor. 
Request
Callback


Additional Information:

  • Item Code: DN2826-1800kv
  • Delivery Time: 8-10 days
Yes! I am interested
View PDF

Brushless Motor D2826-1100KV

Brushless Motor D2826-1100KV
  • Brushless Motor D2826-1100KV
  • Brushless Motor D2826-1100KV
  • Brushless Motor D2826-1100KV
Get Best Quote
Approx. Price: Rs 801 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Voltage7.2v~11.1v 2s~3s Lipoly
Power102W
Pull660gm
Kv1100rpm/v
Shaft3.17mm Diameter
Suggested Propeller8x6(2s) 7x4(3s)

D2826 is a brushless motor with KV ratting of 1100. Brushless motors are synchronous motors which are powered by a DC electric source via an integrated inverter/switching power supply, which produces an AC electric signal to drive the motor. In this context, AC, alternating current, does not imply a sinusoidal waveform, but rather a bi-directional current with no restriction on waveform. Note: D2826-1100kV is a Short shaft BLDC motor.
Request
Callback


Additional Information:

  • Item Code: D2826-1100KV
  • Delivery Time: 8 - 10 Days
Yes! I am interested
View PDF

D2826-1400KV Brushless Motor

D2826-1400KV Brushless Motor
  • D2826-1400KV Brushless Motor
  • D2826-1400KV Brushless Motor
  • D2826-1400KV Brushless Motor
Get Best Quote
Approx. Price: Rs 808 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Model Name/NumberD2826
Rpmn1400KV
Pull780g
Max Power205W
Battery2-3Li-Po
Ri(M)0.078
ESC30A
Motor size27.7*26.3(mm)
Weight50g
Shaft Size3.175 x37 mm
Prop9x4.7/7x4

D2826-10 is a brushless motor with KV ratting of 1400. Brushless motors are are synchronous motors which are powered by a DC electric source via an integrated inverter/switching power supply, which produces an AC electric signal to drive the motor. In this context, AC, alternating current, does not imply a sinusoidal waveform, but rather a bi-directional current with no restriction on waveform. Note: D2826-1400kV is a Short shaft BLDC motor.
Request
Callback


Additional Information:

  • Delivery Time: 8 - 10 days
Yes! I am interested
View PDF

A2212 Brushless Motor

A2212 Brushless Motor
  • A2212 Brushless Motor
  • A2212 Brushless Motor
Get Best Quote
Approx. Price: Rs 320 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
No Of Poles4
Current0.7A
Efficiency current (maximum)6-12A (>75%)
Number of cells2-3s Lipo; 6-10 cell NiMh
Maximum current16A/60s
Motor size27.5mm x 30mm
Shaft size3.17mm
Weight47g
Model Name/NumberA2212
PowerAvailable in 1000 & 1400 KV
Max Efficiency80%
Max Efficiency Current4-10A (>75%)
Current Capacity12A/60s
No Load Current10V 0.5A
No. Of Cells2-3 Li-Poly

  • 1400KV UAV brushless motor
  • Ideal to work with 30A ESC
  • Efficiency current (maximum): 6-12A (>75%)
  • Current (no load): 0.7A

The UAV Brushless Motor A2212/10 1400Kv provides excellent performance, quality, and dependability at an affordable price. Manufactured with high quality bearings and components, this brushless motor is one of the smoothest and most powerful in its class. Each motor is pre-solderd with 3.5mm male gold bullet connectors and includes an accessory pack with collet-style prop adapter, X-mount plate and matching set of female 3.5mm bullet connectors
Request
Callback


Additional Information:

  • Item Code: A2212
Yes! I am interested
View PDF

ESC 30A With Simonk Firmware

ESC 30A With Simonk Firmware
  • ESC 30A With Simonk Firmware
Get Best Quote
Approx. Price: Rs 320 / PieceGet Latest Price

Product Details:

Packaging TypeBox
Current40A Bec5V/2A
Weight32 g
Size36 x 26 x 7 mm
Input VoltageDC 6 - 16 .8V(2 - 4S Lixx)
Running Current330A(Output Continuous 30A, Burst 40A up to 10 Secs.)
Lipo Cells2-4
NIMH5-12
BEC5V 2amp

This hardware, with the SimonK firmware, gives you the perfect solution for multirotor use.

Highest efficiency 100% N-FET design.
Highest accuracy with crystal oscillator (Temperature won't affect the PWM operating range like other cheap ESC's).
  • No low voltage cutoff, because any cutoff in a multirotor = crash.
  • No over temp cutoff, because any cutoff in a multirotor = crash.
  • Super high refresh rate, no buffering of the input signal, resulting in more than 490Hz response rate.
  • 16KHz motor frequency, giving fastest response of the motor, and quietest operation as well (no 8KHz squeal).
  • Super simple, foolproof operation. Nothing to program other than the throttle range
Request
Callback
Yes! I am interested
View PDF

N20 Micro Gear Motor 3v 100RPM Kit

N20 Micro Gear Motor 3v 100RPM Kit
  • N20 Micro Gear Motor 3v 100RPM Kit
  • N20 Micro Gear Motor 3v 100RPM Kit
Get Best Quote
Approx. Price: Rs 650 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Speed100 rpm
Voltage3V
Usage/ApplicationRobotics
Gearbox DiameterGearbox Length 9 mm
Weight11 gms
Motor Sizes15 x 12 x 10 mm
ModelN20

These N20 3V 100RPM Micro Metal Gear Motor With Encoder is intended for use at 3V. Though in general, these kinds of motors can run at voltages above and below this nominal voltage; so they should comfortably operate till the 3V (rotation can start at voltages as low as 0.5 V).


Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. The micro metal gear motors are available in a wide range of gear ratios—from 5:1 up to 1000:1. With the exception of 1000:1 gear ratio versions, all of the micro metal gear motors have the same physical dimensions; so one version can be easily swapped for another if your design requirements change.

Request
Callback


Additional Information:

  • Item Code: N20-3V-100RPM-KIT
Yes! I am interested

N20 Micro Gear Motor 3v 150RPM Kit

N20 Micro Gear Motor 3v 150RPM Kit
  • N20 Micro Gear Motor 3v 150RPM Kit
  • N20 Micro Gear Motor 3v 150RPM Kit
Get Best Quote
Approx. Price: Rs 650 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Speed150 rpm
Voltage3V DC
Usage/ApplicationRobotics
Motor Sizes15 x 12 x 10 mm
Shaft DiameterOutput Shaft Size 3 x 10mm
Weight11 gms

These N20 3V 150RPM Micro Metal Gear Motor With Encoder is intended for use at 3V. Though in general, these kinds of motors can run at voltages above and below this nominal voltage; so they should comfortably operate till the 3V (rotation can start at voltages as low as 0.5 V).


Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. The micro metal gear motors are available in a wide range of gear ratios—from 5:1 up to 1000:1. With the exception of 1000:1 gear ratio versions, all of the micro metal gear motors have the same physical dimensions; so one version can be easily swapped for another if your design requirements change.

Request
Callback


Additional Information:

  • Item Code: N20-3V-150RPM-KIT
Yes! I am interested

Electronic Speed Controller 30A - DYS

Electronic Speed Controller 30A - DYS
  • Electronic Speed Controller 30A - DYS
Get Best Quote
Approx. Price: Rs 801 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Current30A (Output Continuous 30A, Burst 40A up to 10 Secs.)
Input2-5S LiPo
Size/Dimension46mm (L) * 26mm (W) * 11mm (H)
Weight23 gm
BEC5V 2 Amp

This is a Multi-copter Brushless Motor Speed Controller with a running current of 30A. The power input uses extreme low output resistance greatly enhance the power stability, and has the protective effect on the battery.Separately voltage regulator IC for microprocessor. providing good anti-jamming capability. Using Simon K’s a dedicated multi-copter program tgy_debug, and the master chip with high stability crystal oscillator, making the motor control to more precise.

Specification:
  • With SimonK updated firmware for Multicopter
Request
Callback


Additional Information:

  • Delivery Time: 8 - 10 days
Yes! I am interested
View PDF
X

Explore more products



Reach Us
Dileep Jain (CEO)
399, 3rd Floor, Manek Chambers
Lamington Road, Mumbai- 400004, Maharashtra, India



Call Us

Share Us

F GT L


Send E-mailSend SMS