GSM, GPS, GPRS Modules & Accessories

Product Details:

blox NEO-6M GPS Module Aircraft Flight Controller Arduino MWC IMU APM2 projects robots NEW

Ublox / u-blox NEO-6M GPS module with antenna and build-in EEPROM

This module is compatible with APM2 and APM2.5, and EEPROM can save all your configuration data.

Features:

• Ublox NEO-6M-0001 GPS Module
• Come with ceramic antenna.
• Use the USART TTL or IIC serial for communication.
• With IIC serial interface
• Serial port baud rate default: 9600,4800 and 38400 optional,NMEA communication protocol.
• Compatible with a variety of flight control such Rabbit,MWC or Pirate FC.

Product Details:

This is a rubber duck GSM Antenna with standard SMA Male Connecter and 3 meter wire length. It provides high gain of 2 dBi and suitable for tough terrain and open air environment applications. In comes with magnetic base.

Mechanical specifications:

• Connector SMA male
• Magnetic Base.

Product Details:

Description: This is the antenna for GSM Modems. A small, high-quality, quad-band, standard SMA terminated, cellular antenna. Has a length of 2 inches.

 

Specifications of our offered GSM Antenna are:

• 90 Degree Connector
• GSM/850E : 824 to 894MHz
• GSM : 880 to 960MHz
• DCS : 1710 to 1880MHz
• PCS : 1850 to 1990MHz

Additional Information:

• Item Code: GSM-2DBI-Rubber-Duck

Product Details:

GPS external active antenna series is designed to work in perfect harmony with MTK GPS module. Featuring water proof design for use in tough terrain and environment, it maximizes the potential of GPS module by bringing exceptional GPS signal reception performances.This module comes in SMA connector format with 2 meter length. In addition, they come with embedded magnet at the bottom for easy mounting on top of automobiles.

Features:

• Embedded Magnet for easy mounting
• Water- Proof Design
• 2.5 M Cable with SMA Connector

 

Product Details:

Description: This antenna is designed for GSM GPRS 900/1800mhz system of communication terminal system. The antenna is structure compact and convenient for easy installation. Commonly used in GSM repeater,GSM sensor,GSM module & GSM modems.

Electrical specifications:

• Frequency range -MHz
  800MHz-960MHz,
• 1880MHz-1930MHz
• (V.S.W.R ≤ 2.0 Gain-dBi 2.0 Polarization Vertical Impedance- Ω 50 Maximum Input Power-W 10)

Mechanical specifications:

• Connector SMA male
• 3 Meter Wire Length
• Radome material Metal
• Radome color black
• Operation Temperature- -30~60
• Humidity-% 5~95
• Magnetic Base.

Additional Information:

• Item Code: GSM-Magnetic-Antenna

Product Details:

2.4GHz Duck Antenna Male 6dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with RF ICs. 50 ohm impedance.

Features:

• Product Type: Dual frequency wifi antenna

Product Details:

This  compact  2.4  GHz omni-directional  "rubber-duck"  antenna  provides  broad coverage and 2 dBi gain. It is a coaxial sleeve design with an omni-directional pattern. It is  ideally  suited  for IEEE  802.11b and  802.11g  wireless  LANs,Bluetooth®  and  other WLAN applications.

 

Measuring  11  cm  long,  This  flexible  antenna  features  a  tilt and swivel  Reverse Polarity SMA Plug connector, allowing them to be used vertically, at a right angle, or any angle in-between. It is suitable as a replacement RF antenna for many access points and radios  that  are  equipped  with  reverse-polarity  SMA  connectors including D-Link®, Linksys® WET11 and others.

Product Details:

GSM antenna designed for GSM GPRS at 900 (i.e. 800 MHz To 960 MHz) as well as 1800 (1780 -1930 MHz) band of communication terminal system. It's structure is compact and convenient for easy installation. Majorly used in GSM repeater, GSM sensor, GSM module GSM modems. Also widely used in UV5R/Plus, UV5RA/Plus, UV5RE/Plus, UV5RB, UV5RC, UV5RD, UV3RPlus, BF-320, BF-480, BF-490, BF-520, BF-V6, BF-V8 etc.

Electronic specifications:

• V.S.W.R ≤ 2.0 Gain-dBi 6.0

 

Mechanical Specifications:

• Radome material Metal
• Radome color black
• Magnetic Base.

Product Details:

SIM800C is a complete Quad-band GSM/GPRS solution in a SMT type, which can be embedded in the customer applications. SIM800C supports, it can transmit Voice, SMS and data information with low power consumption. It can smoothly fit into slim and compact demands of customer design.

Features:

• Communications module type:GSM/Bluetooth
• Standard :2G
• Module output power:1 W (class 1 @ 1800/1900MHz), 2W (class 4 @ GSM850/EGSM900)

Specifications for GPRS Data:

• GPRS class 12: max. 85.6 kbps (downlink/uplink)
• PBCCH support
• Coding schemes CS 1, 2, 3, 4
• PPP-stack
• USSD

Interface:

• 42SMTpins including
• Analog audio interface
• RTC backup
• USB interface
• Serial interface
• Interface to external SIM 3V/1.8V
• GPIO
• ADC
• GSM Antenna pad

Product Details:

Designed for global market, SIM800 is a quad-band GSM/GPRS module that works on frequencies GSM 850MHz, EGSM 900MHz, DCS 1800MHz and PCS 1900MHz. SIM800 features GPRS multi-slot class 12/ class 10 (optional) and supports the GPRS coding schemes CS-1, CS-2, CS-3 and CS-4. With a tiny configuration of 24*24*3mm, SIM800 can meet almost all the space requirements in users' applications, such as M2M, smart phone, PDA and other mobile devices. SIM800 has 68 SMT pads, and provides all hardware interfaces between the module and customers' boards.

 

Main Features:

• TCP/IP TCP/IP AT firmware
• Support up to 5*5*2 Keypads
• One full function UART port, and can be configured to two independent serial ports.
• One USB port can be used as debugging and firmware upgrading.
• Audio channels which include a microphone input and a receiver output.
• Programmable general purpose input and output.
• One SIM card interface.
• Support Bluetooth function.
• Support one PWM.
• PCM/SPI/SD card interface, only one function can be accessed synchronously. (default function is PCM)

Product Details:

SIM808 module is a complete Quad-Band GSM/GPRS module which combines GPS technology for satellite navigation. The compact design which integrated GPRS and GPS in a SMT package will significantly save both time and costs for customers to develop GPS enabled applications. Featuring an industry-standard interface and GPS function, it allows variable assets to be tracked seamlessly at any location and anytime with signal coverage.

Features:

• GPRS multi-slot class 12/10
• GPRS mobile station class B
• Compliant to GSM phase 2/2+
  Class 4 (2 W @ 850/900MHz)
  Class 1 (1 W @ 1800/1900MHz)
• Bluetooth: compliant with 3.0+EDR
• Control via AT commands (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands)
• Low power consumption

GPS Specifics

• GPS Receiver channels: 22 tracking / 66 acquisition
• Coarse/Acquisition code: GPS L1
• Time-To-First-Fix: Cold starts: 30s (typ.), Hot starts: 1s (typ.), Warm starts: 28s (typ.)

Product Details:

The SIM800A Quad Band GSM/GPRS Serial Modem has a SIM800A GSM chip and RS232 interface while enables easy connection with the computer or laptop using the USB to Serial connector or to the microcontroller using the RS232 to TTL converter. Once you connect the SIM800A modem using the USB to RS232 connector, you need to find the correct COM port from the Device Manger of the USB to Serial Adapter. Then you can open Putty or any other terminal software and open an connection to that COM port at 9600 baud rate, which is the default baud rate of this modem.

Once a serial connection is open through the computer or your microcontroller you can start sending the AT commands. When you send AT commands for example: 'ATr' you should receive back a reply from the SIM800A modem saying 'OK' or other response depending on the command send.

Important Note:

• The SIM800A requires huge power, so use a 12V DC 2 to 3 Amps adapter, any wrong adapter might cause damage also to the modem.
• On the board there are Tx(D) and Rx(D) pins, near the 5V and GND pins, don't ever connect anything to them or send any command to them, they are not the TTL pins for serial communication, they are for upgrading the firmware, and if you connect them to the microcontroller or computer, the firmware will get damaged and the module will stop working.
• Please read carefully the marking on the SIM card tray on how to open or close, those are made of brittle plastics and will break if you put too much pressure on them, so be very gentle and careful while removing or inserting SIM Cards.
• Don't tight the antenna too much, the screw threads might get damaged by excessive or over tightening of antenna.
• Please don't touch the connections or components and always put the modem on a non conductive base.

Product Details:

Based on the latest SIMCOM SIM808 GSM/GPS module, this board offers cellular GSM and GPRS data along with GPS technology for satellite navigation.

The GPS receiver is incredibly sensitive with 22 tracking and 66 acquisition channels, and also supports assisted-GPS (A-GPS) for indoor localisation. The module is controlled by AT command via UART and supports 3.3V logical level. It comes with a mini GPS and GSM antenna.

Specifications:

• Quad-band 850/900/1800/1900MHz - connect onto any global GSM network with any 2G SIM
• Fully-integrated GPS (MT3336 chipset with -165 dBm tracking sensitivity) that can be controlled and query over the same serial port
• Make and receive voice calls using a headset or an external 32Ω speaker + electret microphone
• Send and receive SMS messages
• Send and receive GPRS data (TCP/IP, HTTP, etc.)
• PWM/Buzzer vibrational motor control
• AT command interface with "auto baud" detection

GPS specifications:

• 22 tracking /66 acquisition channels
• GPS L1 C/A code
• Sensitivity
• Time-To-First-Fix

Product Details:

SIM800 supports Quad-band 850/900/1800/1900MHz, it can transmit Voice, SMS and data information with low power consumption.

Featuring Bluetooth and Embedded AT, it allows total cost savings and fast time-to-market for customer applications.

SIM800 modules are upgraded version of its previous successful GSM/GPRS/GPRS module series SIM900.

SIM800 GSM modules have  inbuilt Bluetooth stack compliant with 3.0+EDR FM radio support, and the interface is accessible using AT commands.

SIM800,SIM800C modem operates from 3.4V to 4.4V supply range (Reduced operating range  !)

SIM900, SIM900A modules operate from 3.2V to 4.8V supply range.

Same AT commands used for simple call/sms functionality of SIM900 can be used with the SIM800 modules, but SIM800 series have added AT command set for supporting extra features like bluetooth.

General Features:

• GPRS multi-slot class 12/10        
• GPRS mobile station class B
• Compliant to GSM phase 2/2+
• Class 4 (2 W @ 850/900MHz)
• Class 1 (1 W @ 1800/1900MHz)
• Control via AT commands:(3GPP TS 27.007,27.005 and SIMCOM enhanced AT Commands)
• Low power consumption

Specifications for GPRS Data:

• GPRS class 12: max. 85.6 kbps (downlink/uplink)       
• PBCCH support    
• Coding schemes CS 1, 2, 3, 4
• PPP-stack         
• CSD up to 14.4 kbps   
• USSD         
• Non transparent mode

Specifications for SMS via GSM/GPRS:

• Point to point MO and MT
• SMS cell broadcast
• Text and PDU mode

Software Features:

• 0710 MUX protocol
• Embedded TCP/UDP protocol
• FTP/HTTP
• MMS
• E-MAIL
• DTMF
• Jamming Detection
• Audio Record
• TTS (optional)
• Embedded AT (optional)

Product Details:

SIM868 module is a complete Quad-Band GSM/GPRS module which combines GNSS technology for satellite navigation. The compact design with LCC and LGA pads will significantly save both time and costs for customers to develop GNSS enabled applications. Featuring an industry-standard interface and GNSS function, it allows variable assets to be tracked seamlessly at any location and anytime with signal coverage

Product Details:

Additional Information:

• Item Code: SIM7600EI

Product Details:

The SIM800L module supports quad-band GSM/GPRS network, available for GPRS and SMS message data remote transmission. The SIM800L communicates with microcontroller via UART port, supports command including 3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands. It also has built-in level translation, so it can work with microcontroller of higher voltage than 2.8V default. Besides, the board also supports A-GPS technique which is called mobile positioning and gets position by mobile network. This features make it can also be a tracker module.

Features:

• GPRS multi-slot class12 connectivity: max. 85.6kbps(down-load/up-load)
• GPRS mobile station class B
• Controlled by AT Command (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands)
• Supports Real Time Clock
• Supports A-GPS
• Supports 3.0V to 5.0V logic level
• Low power consumption, 1mA in sleep mode
• Micro SIM Card

Product Details:

A Quad-band antenna for embedded cellular devices. This antenna will allow you to connect your cellular module to the outside world. Operates on four frequencies. Comes with a 3M adhesive backing for mounting. Standard male SMA terminated.

 

Key Specifications:

• Quad-band: 850/900/1800/1900MHz and 2.4GHz
• For GSM/GPRS, CDMA/1X, TDMA/AMPs, CDPD, 2 Way pager Re-Flex

Additional Information:

• Item Code: GSM-Antenna-Sticker

Product Details:

SIM7600CE SIMCOM Module is able to make and receive voice calls, data calls, SMS and make GPRS/UMTS/HSPA+/LTE traffic in -40℃ ~ +85℃. The performance will be reduced slightly from the 3GPP specifications if the temperature is outside the normal operating temperature range and still within the extreme operating temperature range.

Additional Information:

• Item Code: sim7600ce
• Delivery Time: 8 - 10 days

Product Details:

General features:

• GPRS multi-slot class 12/10
• GPRS mobile station class B
• Compliant to GSM phase 2/2+– Class 4 (2 W @ 850/900MHz)– Class 1 (1 W @ 1800/1900MHz)
• Control via AT commands(GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands)
• Low power consumption
• Specifications for GPRS Data
• GPRS class 12: max. 85.6 kbps (downlink/uplink)
• PBCCH support
• Coding schemes CS 1, 2, 3, 4
• PPP-sta
• CSD up to 14.4 kbps
• USSD

Specifications for SMS via GSM/GPRS:

• Point to point MO and MT
• SMS cell broadcast
• Text and PDU mode

Software features:

• 0710 MUX protocol
• Embedded TCP/UDP protocol
• FTP/HTTP
• MMS
• POP3/SMTP
• DTMF
• Jamming Detection
• Audio Record
• SSL
• Bluetooth 3.0 (optional)

Interfaces:

• 68 SMT pads including
• Analog audio interface
• RTC
• Serial interface
• USB interface
• Interface to external SIM 3V/1.8V
• PWM
• I2C
• GPIO
• ADC
• GSM Antenna pad
• Bluetooth Antenna pad

Specification for Audio:

• Tricodec-Half Rate (HR)-Full rate (EFR)-Enhanced Full Rate (EFR)
• AMR-Half Rate (HR)-Full rate (FR)
• Support echo suppression algorithms

Additional Information:

• Item Code: SIM800A
• Delivery Time: 8-10 days

Product Details:

Additional Information:

• Item Code: SIM7600I