Ours is a reputed firm, prominently engaged in supplying and trading Humidity and Temperature Sensor in varied specifications at most competitive prices. The offered product is fabricated from best grade organic macromolecule material and ultra modern technology to ensure its durable performance at the customer's end. These humidity sensors are widely used in numerous industries like textile, tobacco, pharmaceutical, hospitals, workshops, storage and meteorology.
|Minimum Order Quantity||1 Piece|
|Temperature Range||32.0 to 42.5 deg C|
|Thermometer Type||Infrared Thermometers|
|Auto Off Function||Power off automatically 15 seconds after idle|
|Size/Dimension||160 x 100 x 40 mm|
Get Your own Personalised Pencil Thermometer YMICS YMITF01 Infrared thermomete, 24 Hours GSM BPM, Digital Electronic thermometer gun YMITF01, Infrared forehead thermometer baby children adult Quick Measurement temperature non-contact digital thermometer gun, Forehead Non-contact Forehead Infrared Digital Thermometer for body temperature, Simple operation, Fast response, Applicable to both infants and adults, Energy-saving, LED monitor, Up to 32 date values & Diagnose Yourself Early, Need to check your body temperature regularly.
|Accuracy||humidity +/- 2 % RH (Max +/- 5 % RH) ,|
|Sensor Length (millimetre)||small size 14 x 18 x 5.5 mm; big size 22 x 28 x 5 mm|
|Humidity sensor||Polymer humidity capacitor|
|Supply voltage||3.3 to 5.5V DC|
|Operating range||humidity 0 to-100 % RH , temperature - 40 to 80 deg Celsius|
|Output signal||digital signal via 1- wire bus|
|Resolution or sensitivity||humidity 0.1% RH ; temperature 0.1 Celsius|
|Repeatability||humidity +/- 1% RH; temperature +/- 0.2 Celsius|
|Sensing period||Average: 2 s|
|Accuracy||humidity +-2%RH(Max +-5%RH); temperature +-0.5Celsius|
|Voltage||3.3 TO 5.5V DC|
|I Deal In||New Only|
AM2302 output calibrated digital signal. It applys exclusive digital-signal-collecting-technique and humidity sensing technology, assuring its reliability and stability. Its sensing elements is connected with 8-bit single-chip computer.
Every sensor of this model is temperature compensated and calibrated in accurate calibration chamber and the calibration-coefficient is saved in type of programme in OTP memory, when the sensor is detecting, it will cite coefficient from memory.
Small size & low consumption & long transmission distance(100m) enable AM2302 to be suited in all kinds of harsh application occasions. Single-row packaged with four pins, making the connection very convenient.
digital signal via 1-wire bus
Polymer humidity capacitor
humidity 0-100%RH; temperature -40~80Celsius
humidity +-2%RH(Max +-5%RH); temperature +-0.5Celsius
Resolution or sensitivity
humidity 0.1%RH; temperature 0.1Celsius
humidity +-1%RH; temperature +-0.2Celsius
|Accuracy||At 25 deg C +/- 5% RH|
|Temperature Range (Degree Celsius)||At 25 deg C +/- 2 deg C|
|Application||HVAC, dehumidifier, testing and inspection equipment, consumer goods, automotive, automatic control,|
|Humidity||20%-80%, 5% accuracy;|
|Temperature||0deg to 50 deg C, +/- 2 deg C accuracy|
|Power supply||DC 3.5-5.5V|
|Sampling period||more than 2 seconds|
DHT11 is an inexpensive sensor that provides calibrated digital outputs for ambient temperature and relative humidity. It comes in a single row 4-pin package and operates from 3 to 5.5V power supply. It can measure temperature from 0-50 °C with an accuracy of ±2°C and relative humidity ranging from 20-95% with an accuracy of ±5%. It has got its own proprietary 1-wire protocol, and therefore, the communication between the sensor and a microcontroller is not possible through a direct interface with any of its peripherals. The protocol must be implemented in the firmware of the MCU through bit-banging of an I/O pin.
Low-cost temperature and humidity sensor. Requires a single digital I/O pin to read both temperature and humidity values.
|Minimum Order Quantity||1 Piece|
|Size||28mm x 12mm x 8mm|
|Operating Voltage||3.0V to 5.5V|
|Standby current||100-150 micro A|
|Humidity||from 20-80% humidity readings with 5% accuracy|
|temperature||0-50 DegreeC temperature readings +-2 Degree C accuracy|
This module should be connected as follows:
Although it uses a single-wire to send data it is not Dallas One Wire compatible! If you want multiple sensors, each one must have its own data pin!
The DHT11 is a low cost version of the DHT22 sensor. The more expensive DHT22 is more precise, more accurate and works in a wider temperature and humidity range.
|Power Supply Range||3.0V to 5.5V|
|Adjustable Resolution||9 - 12|
|Operating Temperature Range||-55 to 125 Deg C|
|Output Lead||Red (VCC), Black (GND), Yellow (DATA)|
|Cable Length||100 cm|
|Stainless Steel Tube Size||6x 45mm|
This is a Waterproof DS18B20 Temperature Sensor/Thermometer. The probe uses original DS18B20 temperature sensor chip. It is waterproof, moisture-proof and anti-rust with the high-quality stainless steel tube encapsulated. No other components, unique single bus interface.
|Storage Temperature||-40~100 celsius|
|Operating Current||2.8mA (typical); 3mA (max)|
|Transmitting Power||20mW (typical); 30mW (max)|
|Output Voltage Driving Capacity||100mA|
|Output Control Low Level||0V|
|Output Control High Level||3.3V|
|Operating Temperature||20~80 celsius|
|Minimum Order Quantity||1 Piece|
|Current Rating||Static current less than 35mA, attract current less than 65mA|
|Temperature Range||-50 to +110 degC|
|Size||48 x 40mm|
|Static Current||Less Than 35MA|
|Attract Current||Less Than 65MA|
|Output Power||10A relay|
|Humidity||20% ~ 85%|
|able Length||About 52 cm|
|Accuracy||+- 1 Deg C|
|Temperature Range||-9 degC to 99 degC|
|Size||78mm (length) x 50mm (width|
|Dimensions||8mm (length) x 50mm (width)|
|Control Accuracy||1 Deg C|
|Backlash Accuracy||1 Deg C|
|Output||One 10A relay|
|Humidity||20% to 85% RH|
Products Electrical Characteristics:
Instructions for use:
Start indicator: START ( red ) indicator light, said relay device to work.
Stop lights: STOP ( green ) light is on, the relay off, the device stops working.
|Size||38 x 20 mm|
|Temperature range||-40 to 80 deg C resolution0.1deg C error|
|Humidity range||0-100%RH resolution0.1%RH|
|Sequence of the line||VCC,GND,S|
DHT22 capacitive humidity sensing digital temperature and humidity module is one that contains the compound has been calibrated digital signal output of the temperature and humidity sensors. Application of a dedicated digital modules collection technology and the temperature and humidity sensing technology, to ensure that the product has high reliability and excellent long-term stability.
The sensor includes a capacitive sensor wet components and a high-precision temperature measurement devices, and connected with a high-performance 8-bit microcontroller. The product has excellent quality, fast response, strong anti-jamming capability, and high cost.
Standard single-bus interface, system integration quick and easy. Small size, low power consumption, signal transmission distance up to 20 meters, making it the best choice of all kinds of applications and even the most demanding applications.
DHT22 has higher precision and can replace the expensive imported SHT10 temperature and humidity sensor.
It can measure the environment temperature and humidity to meet the high demand.The product has high reliability and good stability.If it's used and combined with special sensor Arduino expansion board,it will be easily implemented the interactive effect which related to the temperature and humidity perception.
Caution: DHT22 digital temperature and humidity sensor is designed for analog sensor interfaces. The analog port will be used as the digital which will not occupy the original digital port of the Arduino.The lines of the sensor which can transform the analog function to digital that can be use on digital port.
|Resolution||9 to 12 bit|
|Temperature range||-55degC to 125degC (-67degF to 257degF)|
|Power indicator||On board|
|board size||21 (mm) x10 (mm)|