Rajguru Electronics (I) Private Limited
Rajguru Electronics (I) Private Limited
Lamington Road, Mumbai, Maharashtra
SEND SMS
SEND EMAIL

LCD Display

We are one of the pioneered suppliers of LCD Display from Mumbai. These are made of superior quality raw-materials procured from from the trusted vendors. Our range of products are widely appreciable for the clarity and a scratch resistant screen which are technologically advanced and have superior finish. Our product range includes Display & LCD such as Graphic Green LCD Green, Graphic Blue LCD, LCD With Blue Back-light, LCD With Green Back Light, LCD With Blue Back Light and Seven Segment Display CA.

7.5 inch Raspberry Pi E-Ink Display HAT

7.5 inch Raspberry Pi E-Ink Display HAT
  • 7.5 inch Raspberry Pi E-Ink Display HAT
  • 7.5 inch Raspberry Pi E-Ink Display HAT
  • 7.5 inch Raspberry Pi E-Ink Display HAT
  • 7.5 inch Raspberry Pi E-Ink Display HAT
Get Best Quote
Approx. Price: Rs 4,950 / PieceGet Latest Price

Product Details:

BrandWaveshare
Display Size163.2 x 97.92 mm
Resolution640 x 384
Operating Voltage3.3V~5V
InterfaceSPI
Outline Dimension170.2 x 111.2 mm
Dot Pitch0.255 x 0.255
Display ColorBlack,White
Grey Level2
Full Refresh Time6s
Refresh Power38 mW (typ.)
Standby Power<0.017 mW
Viewing Angle>170 Degree

Overview:

This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 640x384 resolution, with embedded controller, communicating via SPI interface.

 

Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features:

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Request
Callback
Yes! I am interested

2.9inch E- Paper Display Module

2.9inch E- Paper Display Module
  • 2.9inch E- Paper Display Module
  • 2.9inch E- Paper Display Module
  • 2.9inch E- Paper Display Module
Get Best Quote
Approx. Price: Rs 1,351 / NumberGet Latest Price

Product Details:

Operating Voltage3.3 V
Interface3-wire SPI, 4-wire SPI
Outline Dimension89.5 x 38 mm
Display Size66.89 x 29.05 mm
Dot Pitch0.138 x 0.138
Resolution296 x 128
Display ColorBlack, White
Grey Level2
Refresh Power26.4 mW (typ.)
Standby Power<0.17 mW
Viewing Angle>170 Degree

Overview

This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.


Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.


Features:
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Interface
SymbolDescription
VCC 3.3V
GND Ground
DIN SPI MOSI pin
CLK SPI SCK pin
CS SPI chip selection, low active
DC Data/Command selection (high for data, low for command)
RST External reset, low active
BUSY Busy status output, low active
Request
Callback
Yes! I am interested
View PDF

2.13inch E- Paper Display HAT for Raspberry Pi

2.13inch E- Paper Display HAT for Raspberry Pi
  • 2.13inch E- Paper Display HAT for Raspberry Pi
  • 2.13inch E- Paper Display HAT for Raspberry Pi
  • 2.13inch E- Paper Display HAT for Raspberry Pi
  • 2.13inch E- Paper Display HAT for Raspberry Pi
Get Best Quote
Approx. Price: Rs 1,048 / PieceGet Latest Price

Product Details:

Operating Voltage3.3 V
InterfaceSPI
Outline Dimension65 x 30.2 mm
Display Size23.71 x 48.55 mm
Dot Pitch0.194 x 0.194
Resolution250 x 122
Display ColorBlack,White
Grey Level2
Refresh Power26.4 mW (typ.)
Standby Power<0.17 mW
Viewing Angle>170 Degree

This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.


Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.


Features:
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi 2B/3B/Zero/Zero W
  • Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Interface
SYMBOLDESCRIPTION
VCC3.3V
GNDGround
NCNC
DINSPI MOSI pin
CLKSPI SCK pin
CSSPI chip selection, low active
DCData/Command selection (high for data, low for command)
RSTExternal reset, low active
BUSYBusy status output, low active
Request
Callback
Yes! I am interested
View PDF

1.54inch E- Paper Display Module

1.54inch E- Paper Display Module
  • 1.54inch E- Paper Display Module
  • 1.54inch E- Paper Display Module
  • 1.54inch E- Paper Display Module
Get Best Quote
Approx. Price: Rs 1,078 / PieceGet Latest Price

Product Details:

Operating Voltage3.3 V
Interface3-wire SPI, 4-wire SPI
Outline Dimension48 x 33 mm
Display Size27.6 x 27.6 mm
Dot pitch0.138 x 0.138
Resolution200 x 200
Display ColorBlack, White
Grey Level2
Refresh Power26.4 mW (typ.)
Standby Power<0.17 mW
Viewing Angle>170 Degree

This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.


Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.


Features:
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Interface
SYMBOLDESCRIPTION
VCC 3.3V
GND Ground
DIN SPI MOSI pin
CLK SPI SCK pin
CS SPI chip selection, low active
DC Data/Command selection (high for data, low for command)
RST External reset, low active
BUSY Busy status output, low active
Request
Callback
Yes! I am interested
View PDF

16x2 RG1602 Green LCD Display

16x2 RG1602 Green LCD Display
  • 16x2 RG1602 Green LCD Display
Get Best Quote
Approx. Price: Rs 91 / PieceGet Latest Price

Product Details:

Size16x2 LCD Display
BrandRG
Controller OR driverHD44780 Equivalent LCD Controller/driver Built-In
MPU Interface4-bit or 8-bit
Working voltage5 VDC
Model NumberRG1602
Backlight ColorGreen

This is a high quality 16 character by 2 line intelligent display module, with back lighting, Works with almost any microcontroller.
This is a popular 16x2 lcd display. It is based on the hd44870 display controller hence it is easy to interface with most micro controllers. It works of 5v and has a green back light which can be switched on and off as desired. The contrast of the screen can also be controlled by varying the voltage at the contrast control pin (pin 3).

Features:
  • 16 Characters x 2 Lines
  • 5x7 Dot Matrix Character Cursor
  • HD44780 Equivalent LCD Controller/driver Built-In
  • 4-bit or 8-bit MPU Interface
  • Standard Type
  • Works with almost any Microcontroller
  • Great Value Pricing
Request
Callback
Yes! I am interested
View PDF

RG2004 20X4 LCD Display with Green Backlight

RG2004 20X4 LCD Display with Green Backlight
  • RG2004 20X4 LCD Display with Green Backlight
Get Best Quote
Approx. Price: Rs 250 / PieceGet Latest Price

Product Details:

Model NumberRG2004
Display Size20X4
Backlight ColorGreen
InterfaceI2C
Supply voltageDC +5V
I2C Address0x3F
PCB Size60 x 99 mm
Contrast AdjustPotentiometer

A new high-quality 4 line 20 character LCD module not only set the contrast control knob selector switch also has a backlight and IIC communication interface. For Arduino beginners, not for the cumbersome and complex LCD driver circuit connection and a headache, the real significance of this LCD module will simplify the circuit, this module directly into the Arduino Sensor Shield V5.0 sensor expansion board IIC device interface can, GM 4P sensor connection cable, programmed through the Arduino controller, you can easily identify the slogan, sensor data records.
Request
Callback
Yes! I am interested
View PDF

RG2004 20X4 Blue Backlight LCD Display

RG2004 20X4 Blue Backlight LCD Display
  • RG2004 20X4 Blue Backlight LCD Display
Get Best Quote
Approx. Price: Rs 250 / PieceGet Latest Price

Product Details:

Size20 x 4
BrandRG
Model NumberRG2004
Backlight ColorBlue
Operating Temperature-10 - 60 Deg C
Character Size2.96 x 4.76 mm

This is a popular 20x4 LCD With Blue Back Light display. It is based on the HD 44870 display controller which makes it is easy to interface with most micro controllers. Its extreme popularity ensures that no matter which micro controller platform you are using this LCD on, you will definitely find ready libraries to use this LCD


It works of 5v and has a blue back light which can be switched on and off as desired. The contrast of the screen can also be controlled by varying the voltage at the contrast control pin.

Request
Callback
Yes! I am interested
View PDF

RG12864 128 x 64 Blue Graphic LCD Display

RG12864 128 x 64 Blue Graphic LCD Display
  • RG12864 128 x 64 Blue Graphic LCD Display
Get Best Quote
Approx. Price: Rs 423 / PieceGet Latest Price

Product Details:

Size93 X 70 X 14 mm
BrandRG
Model NumberRG12864
BacklightBlue
Voltage5 V
Display128x64

Customers can avail from us Graphic Blue LCD for displaying alphanumeric characters and other kind of simple graphics. For facilitating neat minus and animations our products are highly demanded in the market. Available in standard size of 128 X 64, these graphic blue LCD's are highly appreciated for their advance features, optimum durability and high compatibility with varied modern devices such as ports and USB.This is a graphic lcd with blue backlight that can display not just alphanumeric characters but also simple graphics. Great for doing neat menus and animations. Can handle 128 64 pixels and comes with a black frame.

This is a 128x64 liquid crystal display that support Chinese character , English characters and even graphics, very suitable for interactive work with Arduino.

Request
Callback
Yes! I am interested
View PDF

RG12864 128 x 64 Green Graphic LCD Display

RG12864 128 x 64 Green Graphic LCD Display
  • RG12864 128 x 64 Green Graphic LCD Display
Get Best Quote
Approx. Price: Rs 425 / PieceGet Latest Price

Product Details:

BrandRG
Display Size128 X 64
Model NumberRG12864
ColorGreen
Dimension93 X 70 X 14 mm
ApplicationUsing with Microcontrollers

We are offering quality tested RG12864 128 x 64 Green Graphic LCD Display that can display not only alphanumeric data but simple graphics also.Fabricated from advance technology, these LCD's are highly suitable for animations and neat menus. Moreover, our product can handle the128*64 pixels and comes with a black frame. Customers can avail this range in desired specifications and configurations at most competitive prices.


Features:

  • Easy To Use
  • Works with Most Microcontrollers
  • Built-in Controller (KS0108B)
  • 5V Power Supply
  • 1/64 Duty Cycle
  • Built-in Backlight
  • Ideal for Moving Displays & Graphics
  • Good Value for money

 

Request
Callback
Yes! I am interested
View PDF

16X2 RG1602 Blue LCD Display

16X2 RG1602 Blue LCD Display
  • 16X2 RG1602 Blue LCD Display
Get Best Quote
Approx. Price: Rs 95 / PieceGet Latest Price

Product Details:

Model NumberRG1602
Backlight ColorBlue
Voltage5V DC
Character Capacity16 X 2
Frequency50 Hz
BrandRG
Controller OR driverHD44780 Equivalent LCD Controller/driver Built-In
Display Size80 X 36 X 12.5 mm

This is a popular 16x2 LCD With Blue Backlight display. It is based on the HD 44870 display controller which makes it is easy to interface this lcd most microcontrollers. Its extreme popularity ensures that no matter which micro controller platform you are using, you will definitely find ready libraries to use this LCD.


It works of 5v and has a blue backlight which can be switched on and off as desired. The contrast of the screen can also be controlled by varying the voltage at the contrast control pin (pin 3).

Request
Callback
Yes! I am interested
View PDF
X

Explore more products



Reach Us
Dileep Jain (CEO)
399, 3rd Floor, Manek Chambers
Lamington Road, Mumbai- 400004, Maharashtra, India



Call Us

Share Us

F GT L


Send E-mailSend SMS