Rajguru Electronics (I) Private Limited
Rajguru Electronics (I) Private Limited
Lamington Road, Mumbai, Maharashtra
SEND SMS
SEND EMAIL

Water Flow Hall Sensor

We are a leading Wholesale Trader of water flow hall sensor yf-g1 dn25 1 inch, yf-s403 3/4 inch water flow hall sensor, water flow hall sensor yf-s402 g1/4 inch, dn40 1.5 inch industrial water flow hall sensor, yf-s201 1/2 inch water flow hall sensor and dn50 2 inch industrial water flow hall sensor from Mumbai, India.

Water Flow Hall Sensor YF-G1 DN25 1 Inch

Water Flow Hall Sensor YF-G1 DN25 1 Inch
  • Water Flow Hall Sensor YF-G1 DN25 1 Inch
Get Best Quote
Approx. Price: Rs 630 / NumberGet Latest Price

Product Details:

Minimum Working VoltageDC 4.5V
Working VoltageDC 5V~18V
Flow Rate Range2~100L/min
Accuracy+/- 3%
Connector typeG1
Dimensions4.49 in x 2.8 in x 1.93 in (11.4 cm x 7.1 cm x 4.9 cm)
Tube diameter1 inch

Water flow sensor consists of a plastic valve body, a water rotor, and a hall-effect sensor. When water flows through the rotor, rotor rolls. Its speed changes with different rate of flow. The hall-effect sensor outputs the corresponding pulse signal. This one is suitable to detect flow in water dispenser or coffee machine.


Features:
  • Compact, Easy to Install
  • High Sealing Performance
  • High Quality Hall Effect Sensor
  • RoHS Compliant

Specifications:
  • Water pressure resistance: = >2MPa
  • Operating Temperature: = -20~85C
  • Insulation resistance: = >100MΩ
  • Characteristics of Flow pulse: f=(4.8*Q) Q=L/Min
  • Accuracy: ±3%
  • Connector type: G1
Request
Callback
Yes! I am interested
View PDF

YF-S403 3/4 Inch Water Flow Hall Sensor

YF-S403 3/4 Inch Water Flow Hall Sensor
  • YF-S403 3/4 Inch Water Flow Hall Sensor
Get Best Quote
Approx. Price: Rs 371 / NumberGet Latest Price

Product Details:

Lowest rated working voltageDC 4.5 5V - 24V.
Maximum Operating Current15 mA (DC 5V)
Working voltage rangeDC 5 - 18V
Allow Pressure1.75Mpa
Storage temperature-25 to + 80 deg c
Flow range1-30L / min
External thread3/4 inch
Output interface diameterCa. Outside 26mm,inside 12mm,14mm.

Water flow sensor is mainly consists of plastic valve body, rotor assembly and hall current sensor. It is installed in the hot water inlet end for detecting water flow. When water through the flow rotor assembly, magnetic rotor will rotate and Speed will change as the flow change. Hall current sensor output corresponding pulse signal and feedback to controller, then the controller will control the flow. Can be used for water heaters, credit card machines, water vending machine, flow measurement device.


Features:

  • Light weight, small size, easy to install.
  • Inlaid with stainless steel impeller shaft, durable wearable.
  • Seal ring with the upper and lower force structure never leaks.
  • Non-violent shock, and chemical erosion.
  • Non-throwing or hitting.
  • Mounted vertically, should not exceed 5 degrees inclination.
  • Temperature of medium should not exceed 120 ℃.


Wire Connections:

  • Red: Positive(+)
  • Yellow: Signal output.
  • Black: Negative(-)


Specifications:

  • Load capacity: ≤ 10 mA (DC 5V).
  • Working temperature: ≤ 80 ℃
  • Working humidity range: 35%-90% RH (no frost)
  • Save Humidity: 25% - 95% RH
  • Size: Approx 6.2 * 3.5 * 4.1 cm
Request
Callback
Yes! I am interested
View PDF

Water Flow Hall Sensor YF-S402 G1/4 Inch

Water Flow Hall Sensor YF-S402 G1/4 Inch
  • Water Flow Hall Sensor YF-S402 G1/4 Inch
Get Best Quote
Approx. Price: Rs 246 / PieceGet Latest Price

Product Details:

Flow Range1~5 L/min
Frequency4380 pulse for 1L through the sensor
Weight1.02 oz (29 g)
Minimum Rated Working VoltageDC 5~24 V
Max Working Current15mA (DC 5V)
Working Voltage RangeDC 5~18 V
Load Capability10mA (DC 5V)
Working Temperature80 Deg C
Humidity Range35%~90% RH (no frost)
Water Pressure<1.75 Mpa
Storage Temperature-25~80 Deg C
Storage Humidity25~95% RH
Dimensions2.28 in x 1.38 in x 1.06 in (5.8 cm x 3.5 cm x 2.7 cm)
Thread SizeG1/4"

Product Features:
  • Lightweight, Small in size, Easy to install;
  • With stainless steel axis in the wheel, abrasion resistant; Sealing ring design to prevent water leaks; Compliant with RoHS standard
  • Suitable for water heater, POS terminal, automatic water dispenser etc.
  • Installation direction: Vertical (inclination should not exceed 5 degrees)
Request
Callback
Yes! I am interested
View PDF

DN40 1.5 Inch Industrial Water Flow Hall Sensor

DN40 1.5 Inch Industrial Water Flow Hall Sensor
  • DN40 1.5 Inch Industrial Water Flow Hall Sensor
Get Best Quote
Approx. Price: Rs 837 / NumberGet Latest Price

Product Details:

BrandSea
Model NumberDN50
MaterialPlastic
Maximum Operating Current15 mA (DC 5V)
Working Voltage RangeDC 5~18 V
Work TemperatureLess Than 80 Deg C
Work Humidity35 ~90% RH
Storage Temperature-25~+80 Deg C
Lowest Rated Working VoltageDC 5V - 24V

Details:
  • Appearance of product identification clear, accurate to meet the requirements in line
  • Flow pulse characteristics F = (0.45 * Q) Q = L / Min meet
  • Low temperature test at -20'C temperature placed after 72h, at room temperature for 1h, the first measurement accuracy within ± 5% value in line
  • High-temperature test temperature at 85'C placed after 72h, at room temperature for 1h, the first measurement accuracy within ± 5% value
Request
Callback
Yes! I am interested
View PDF

YF-S201 1/2 Inch Water Flow Hall Sensor

YF-S201 1/2 Inch Water Flow Hall Sensor
  • YF-S201 1/2 Inch Water Flow Hall Sensor
Get Best Quote
Approx. Price: Rs 218 / PieceGet Latest Price

Product Details:

Operating TemperatureLess than 80 deg C
Load CapacityLess Than 10 mA (DC 5V)
Allowed pressurePressure 1.75mpa
External threads1/2"
Lowest rated working voltageDC4.5 5V-24V
Maximum operating current15 mA (DC 5V)
Operating humidity range35%~90%RH (no frost)
Working Voltage RangeDC 5~18 V
Storage Temperature-25~ 80 DegreeC

Water flow sensor can be used to measure the flow of liquids, i.e. the consumption of liquids in industrial or domestic usage. For example you can make a robotic cocktail dispensing machine, and can use this sensors to accurately measure components like Soda, Water, etc. Water flow sensor consists of a plastic valve body, a water rotor, and a hall-effect sensor. When water flows through the rotor, rotor rolls. Its speed changes with different rate of flow. The hall-effect sensor outputs the corresponding pulse Signal.


Connection details:

  • Red wire is 5V
  • Black wire is GND
  • White wire is PWM signal output


Request
Callback
Yes! I am interested
View PDF

DN50 2 Inch Industrial Water Flow Hall Sensor

DN50 2 Inch Industrial Water Flow Hall Sensor
  • DN50 2 Inch Industrial Water Flow Hall Sensor
Get Best Quote
Approx. Price: Rs 1,044 / PieceGet Latest Price

Product Details:

SensorHall effect
Maximum current15 mA (DC 5 v)
Working voltageDC 5-18 v
Operating Tempup to 80 deg C,humidity 35% -90% RH
Insulation resistanceGreater than 100 m OHM
Storage Temperature-25 deg C to 80 deg C
Output WaveformSquare wave,output pulse signal
Max Size92mm x 68mm
Flow range10-200L / min
Water Pressure1.75 Mpa below
WerkspanningDC 5-18 v

Product Features:
  • Flow bereik: 10-200L/min.
  • State compression: Water pressure 1.75 Mpa below.
  • Werkspanning: DC 5-18 v.
  • Output Waveform: Square wave, output pulse signal.
  • Sensor: Hall effec.
Request
Callback
Yes! I am interested
View PDF

Water float level valve Vertical

Water float level valve  Vertical
  • Water float level valve  Vertical
Get Best Quote
Approx. Price: Rs 310 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
BrandSea
MaterialPVC, Nylon PA66+Food grade rubber
Size100.2x58x50 mm
Working Pressure Range0.2-10 kg
Applicable MediumClean Water
Applicable Medium Temperature0 - 70 Deg C
Resistance To Temperature70 ~ 120 Deg C
Outlet DiameterG 1/2

Floating Ball ValveAutomatic Float Valve Water Level Control Valve F/ Water Tank Water TowerVertical interior Valve G25 


Description:

This valve is the replacement of the traditionalfloat ballcock, which can be applied to various systems of high water tanks,pools, water towers of the industry and civil construction, etc.

  • Automatic control, low self-complementary water,water full automatic stop
  • Four intakes, large volume of water
  • Beautiful appearance, small size, practical,simple installation 
  • Without electricity, easy to use, long life, lowfailure rate, saving water resources

 

When the pool or tank water levels fall, thevalve body will sink down and then the forerunner of the control valve will beopened. As the pipe water pressure affects, the seal face of control valve willbe opened. Finally the water comes out and vice versa

 

Note:

This production belongs to the liquid levelcontrol valves. When installed, the float must be vertical. if you need toinstall from the top , a Elbow needed to connect the float valve and the inletline. Firstly, the feed line should be fixed in horizontal plane and thenconnect the automatic water level control valve on the water inlet according tothe standard. The main water inlet should be lined with the control valves'Normal Diameter. When using, the globe valve should be all open. If two valvesare installed in the same pool, the two valves should be held in the samehorizontal plane. Before installing, please clean the impurities in the pipesin case of blocking.


If the water quality is not good, then thevalves need to be maintained properly.


If the users find the time of adding waterbecomes longer, he can just upload the water inlet and make it washed

 

Note:

Please allow 1-2mm error due to manualmeasurement. Please make sure you do not mind before you bid

Due to the difference between differentmonitors, the picture may not reflect the actual color of the item. Thank you!

Request
Callback
Yes! I am interested

Water Float Valve Straight

Water Float Valve Straight
  • Water Float Valve Straight
  • Water Float Valve Straight
  • Water Float Valve Straight
Get Best Quote
Approx. Price: Rs 306 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
MaterialPVC
BrandSea
Usage/ApplicationWater , Tap Water
Maximum Inclination of Installation30 Degree
Working Pressure RangeMore Than 1.0 MPa
Resident Tap Water Pressure0.3-0.5 Mpa
Applicable Medium TemperatureMore than 1-80 Deg C
High Temperature-20 ~ 100 Deg C

This valve is the replacementof the traditional float ballcock, which can be applied to various systems ofhigh water tanks, pools, water towers of the industry and civil construction,etc.

 

Technical Parameters:

  • The use of siphonwater supply needs to ensure that the water level drop is greater than 80 cm,otherwise it will affect the water output.
  • If two valves areinstalled in the same tank, they should be kept on the same level.

 

Advantage:

  • Fully automaticcontrol, water less self-replenishment, water full stop.
  • Low water qualityrequirements, 6 points of water inlet, and large amount of water.
  • Beautiful appearance,small size, practicality, simple installation.
  • No need forelectricity, easy to use, long life, low failure rate, saving water resources

 

The float valve is divided into 4 types, and the diameter of thepipe is only a 6-point adapter on the original basis.

Request
Callback
Yes! I am interested

SEN-HZ41WC Water Flow Sensor

SEN-HZ41WC Water Flow Sensor
  • SEN-HZ41WC Water Flow Sensor
Get Best Quote
Approx. Price: Rs 204 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
VoltageDC4.5 to18 V
Dimensions62 x 15 x 17mm
Diameter0.25 inch
CurrentLess than 15 mA
Flow Range0.35-3 L/min
Withstand Hydraulic PressureLess Than 1.75 MPa
Insulation Resistance>100 M Ohm
Electrical StrengthAC500V, 50HZ
Pulse Duty Cycle50 %

SEN-HZ41WC flow sensor,G1/4 extenal tooth, one type, intenal tooth into the water ,extenal tooth out  the water ,Waterproof explosion-proof, heat and cold resistance.can be used as a water switch, but also can be used to measure flow, accurate measurement, water flow sensor special use electric water faucet,shower room credit card system, water control machine meter water,water heater,wall hung dedicated.we have two series.If you want to increase the temperature control ,you can add heat sensitive resistor, the output line is green, but also can be connected to the other two special line to control temperature.

Technical Parameter:

  • Water quality requirement: Drinking water health standards, 0~80 Deg C
  • Voltage/electric current: DC4.5~18V, ≤15mA, can be customized 24V
  • Output level: Rated voltage DC5V, high level ≥4.5V, low level ≤0.5V


Application:

Gas water heaters, electric water heater, washing machine, water machine, boiler, electromagnetic water heater, water control (integrated) machine, water machine, heat pump hot water engineering, the card management system of intelligent water meter, water meter, IC campus card sale water system, self sale (sell) water machine, water treatment water distribution equipment, dispensing equipment, cooling system, circulation system, intelligent heating equipment, mechanical equipment, instrumentation, pharmaceutical (agents) equipment etc.

Request
Callback
Yes! I am interested

DN80 3 Inch Water Flow Switch

DN80 3 Inch Water Flow Switch
  • DN80 3 Inch Water Flow Switch
  • DN80 3 Inch Water Flow Switch
  • DN80 3 Inch Water Flow Switch
  • DN80 3 Inch Water Flow Switch
  • DN80 3 Inch Water Flow Switch
Get Best Quote
Approx. Price: Rs 7,500 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
BrandSaier
Operating Pressure0.2-1.75 Mpa
Item CodeDN80
MaterialCopper casting, inner tooth interface, simple and practical structure, can play the role of one-way
Flow Media TypeLiquid
Operating TemperatureFor Long-term use, temperature is less than 80 degree.
Product Dimension124 x 138 x 96 mm
Withstand Pressure1.75 Mpa
ConnectionG 3
Start-up Volume15L/min
Operate Volumemax 250
Switched Power70 W

Product Characteristic: The inner copper baffle moves before and after, and the permanent magnet on the baffle matchesthe dry reed tube for the switching signal(0/1

Product Material: Copper casting, inner tooth interface, simple and practical structure, can play the role of one-wayvalve

Use Medium: Tap Water, if it is used in others medium, please specify,we will provide professional configuration advice.

Operating Temperature:
For Long-term use, temperature is less than 80 dg C.Installation Method: Install horizontally with the product arrow as the direction of entering water.

Flow Regulation:
Start flow can be fine-tuned, loosen the switch fixed nut, upper and lower adjustment with tooth switch copper core can be.
Request
Callback


Additional Information:

  • Item Code: DN80
Yes! I am interested
View PDF

Wh YF-S401 PVC Water Flow Hall Sensor

Wh YF-S401 PVC Water Flow Hall Sensor
  • Wh YF-S401 PVC Water Flow Hall Sensor
Get Best Quote
Approx. Price: Rs 228 / NumberGet Latest Price

Product Details:

Model Name/NumberYF-S401
MediaWater
MaterialPVC
Accuracy99.9%
ColorWhite
Weight0.88 oz (25 g)
Working TemperatureLess Than 80 Deg C
Min Rated Working VoltageDC 5V~24 V
Max Working Current15mA (DC 5V)
Working Voltage RangeDC 5~18V
Load CapabilityLess Than 10mA (DC 5V)
Humidity Range35~90% RH
Water Pressure< 1.75Mpa
Storage Temperature-25 ~ 80 Deg C
Storage Humidity25%~95% RH
Measuring Range1~5 L/min
Dimensions2.28 in x 1.38 in x 1.06 in (5.8 cm x 3.5 cm x 2.7 cm)

Other Features:

  • Suitable for water heater, automatic water dispenser, etc.

 

Certification:

Lightweight, small, easy to install; With stainless steel axis in the wheel, abrasion resistant; Sealing ring would never leak water; All material meets RoHS standard

Request
Callback
Yes! I am interested
View PDF

SEN-HZ21WA Water Flow Sensor

SEN-HZ21WA Water Flow Sensor
  • SEN-HZ21WA Water Flow Sensor
Get Best Quote
Approx. Price: Rs 200 / PieceGet Latest Price

Product Details:

Usage/ApplicationGas fired boiler, electric water heater, circulating water system, water control machine, instrument
BrandSaier
MediaWater
MaterialNylon PA 66
Diameter Inch0.5 Inch
Flow Range1~30 L/Min(Multiple flow ranges to be optional)
Insulation resistance>100 M Ohm
Withstand Hydraulic PressureLess Than 1.75 MPa
Electrical StrengthAC500V, 50Hz
Pulse Duty Cycle50 %

Nylon PA 66 material, apply to gas fired boiler, electric water heater, circulating water system, water control machine, instrument and meter etc.

  • Water quality requirement: Drinking water health standards, 0~60???
  • Voltage/electric current: DC4.5???18V,≤15mA,can be customized 24V
  • Output level: Rated voltage DC5V,high level ≥4.5V,low level ≤0.5V
  • Flow characteristic: F=10Q,F:HZ,Q:L/min???±10%
Request
Callback


Additional Information:

  • Item Code: SEN-HZ21WA
Yes! I am interested

SEN-HZ43WA Water Flow Sensor

SEN-HZ43WA Water Flow Sensor
  • SEN-HZ43WA Water Flow Sensor
Get Best Quote
Approx. Price: Rs 295 / PieceGet Latest Price

Product Details:

Model Name/NumberSEN-HZ43WA
BrandSaier
MediaWater
MaterialNylon PA 66
VoltageDC 4.5 to 18 V
CurrentLess than 15 mA
Flow Range2-45L/min(Multiple flow range to be optional)
Insulation Resistance>100 M Ohm
Electrical strengthAC500V, 50Hz
Pulse Duty Cycle50%

Nylon PA 66 material, apply to gas water heater, circulating water system,boosting heating, solar energy pump etc.

  • Water quality requirement: Drinking water health standards, 0-60℃
  • Voltage/electric current: DC4.5-18V, ≤15mA, can be customized 24V
  • Output level: Rated voltage DC5V, high level ≥4.5V, low level ≤0.5V
  • Flow characteristic: F=4.5Q, F:HZ, Q:L/min,±10%
Request
Callback
Yes! I am interested

SEN-HZ21WI Water Flow Sensor

SEN-HZ21WI Water Flow Sensor
  • SEN-HZ21WI Water Flow Sensor
Get Best Quote
Approx. Price: Rs 200 / PieceGet Latest Price

Product Details:

BrandSaier
Model Name/NumberSEN-HZ21WI
MediaWater
MaterialBrass
Currentless than 15mA
VoltageDC4.5 to 18V
Diameter Inch0.5 inch
DisplayNo

Brass material, apply to instantaneous electric hot water heater, gas water heater, water control machine, instrument meter etc.

  • Water quality requirement: Drinking water health standards, 0-80℃
  • Voltage/electric current: DC4.5-18V, ≤15mA, can be customized 24V
  • Output level: Rated voltage DC5V, high level ≥4.5V, low level ≤0.5V
  • Flow characteristic: F=10Q-4, F:HZ, Q:L/min±10%
  • Cumulative flow conversion: 1L water=553pulse, accuracy: 10%
Request
Callback


Additional Information:

  • Item Code: SEN-HZ21WI
Yes! I am interested

SEN-HZ43WB Water Flow Sensor

SEN-HZ43WB Water Flow Sensor
  • SEN-HZ43WB Water Flow Sensor
Get Best Quote
Approx. Price: Rs 295 / PieceGet Latest Price

Product Details:

Model Name/NumberSEN-HZ43WB
BrandSAIER
MediaWater
MaterialBrass
VoltageDC 4.5 to 18 V
Operating Temperature0 to 80 deg C
Diameter0.75 inch ( 3/4 inch)
Flow Range2 to 45 L/min

Brass material, apply to solar energy pump ,gas hot water heater, water control machine,intelligent water meter etc.

  • Water quality requirement: Drinking water health standards, 0~80℃
  • Withstand hydraulic pressure: ≤1.75 MPa
  • Voltage/electric current: DC4.5~18V, ≤15mA, can be customized 24V
  • Insulation resistance: >100MΩ
  • Electrical strength: AC500V, 50HZ
  • Output level: Rated voltage DC5V, high level ≥4.5V, low level ≤0.5V
  • Pulse duty cycle: 50%
  • Flow characteristic: F=8.1Q-3, F:HZ, Q:L/min,±10%
  • Cumulative flow conversion: 1L water=477pulse, accuracy: 10%
Request
Callback


Additional Information:

  • Item Code: SEN-HZ43WB
Yes! I am interested

SEN-HZG1WA Water Flow Sensor

SEN-HZG1WA Water Flow Sensor
  • SEN-HZG1WA Water Flow Sensor
Get Best Quote
Approx. Price: Rs 570 / PieceGet Latest Price

Product Details:

Usage/ApplicationIndustrial
Model Name/NumberSEN-HZG1WA
Packaging TypeBox
Flow Range4~45 L/Min
Insulation Resistance>100 M Ohm
Withstand Hydraulic PressureLess than 1.75 MPa
Electrical StrengthAC500 V, 50 Hz
Pulse Duty Cycle50%

Brass material, apply to solar energy pump ,air energy water heater,mechanical equipment,instrument meter etc.

  • Water quality requirement: Drinking water health standards, 0~80℃
  • Voltage/electric current: DC4.5~18V, ≤15mA, can be customized 24V
  • Electrical strength: AC500V, 50HZ
  • Output level: Rated voltage DC5V, high level ≥4.5V, low level ≤0.5V
  • Flow characteristic: F=5Q-3, F:HZ, Q:L/min, ±10%
  • Cumulative flow conversion: 1L water=225pulse ,accuracy: 10%
Request
Callback


Additional Information:

  • Item Code: SEN-HZG1WA
Yes! I am interested

SEN-PPI35 Water Float Level Switch

SEN-PPI35 Water Float Level Switch
  • SEN-PPI35 Water Float Level Switch
Get Best Quote
Approx. Price: Rs 90 / PieceGet Latest Price

Product Details:

Switching Power10 W,normally open,(NO)
Rated VoltageLess Than DC24V(for high voltage use, access intermediate relay)
Insulation Resistor108 Ohm
Switching Life108 times
Switching Response Time0.2 ms
Fix ScrewM10
Floating Diameter24 mm
Installation MethodVertical Entry 35 mm

Plastic PP material, switching signal,apply to water dispenser,humidifier,water air conditioning, air conditioning fan etc.

  • Used medium: Water or liquid that has no damage to the float,0- 60℃
  • Voltage/electric current: Below DC110V,≤0.5A
  • Custom-made: Wire harness specification, dimension of float, warning point, switching power
Request
Callback


Additional Information:

  • Item Code: SEN-PPI35
Yes! I am interested

SEN-PPI150 Water Float Level Switch

SEN-PPI150 Water Float Level Switch
  • SEN-PPI150 Water Float Level Switch
Get Best Quote
Approx. Price: Rs 170 / PieceGet Latest Price

Product Details:

Switching Power10 W, normally open, (NO), double alarm point
Rated VoltageLess Than DC24V(for high voltage use, access intermediate relay)
Insulation Resistor108 Ohm
Switching Life108 times
Switching Response Time0.2 ms
Fix ScrewM 10
Floating Diameter24 mm
Installation MethodVertical entry 150 mm

Plastic PP material, switching signal,apply to water dispenser,humidifier,water air conditioning, air conditioning fan etc.


Technical parameter:

  • Used medium: Water or liquid that has no damage to the float,0- 60 Deg C
  • Voltage/electric current: DC2000V,≤0.5A
  • Custom-made: Wire harness specification, dimension of float, warning point, switching power

 

 

Request
Callback


Additional Information:

  • Item Code: SEN-PPI150
Yes! I am interested

SEN-CK3224 Proximity Switch with Magnet

SEN-CK3224 Proximity Switch with Magnet
  • SEN-CK3224 Proximity Switch with Magnet
Get Best Quote
Approx. Price: Rs 120 / PieceGet Latest Price

Product Details:

BrandSAIER
Model Name/NumberSEN-CK3224
Switching Power10W, normally open, (NO)
Insulation Resistor108 Ohm
Switching Life108 times
Switching Response Time0.2 ms
Proximity Switch Fixed Space14 mm

Specification:
  • Apply to site and location without magnetic interference
  • Recommended voltage: <=DC24V (for high voltage use, access intermediate relay)
  • Custom made: wire harness specification, switching power, specification of magnet.
Request
Callback


Additional Information:

  • Item Code: SEN-CK3224
Yes! I am interested

SEN-PPY35 Water Float Level Switch

SEN-PPY35 Water Float Level Switch
  • SEN-PPY35 Water Float Level Switch
Get Best Quote
Approx. Price: Rs 165 / PieceGet Latest Price

Product Details:

Switching Power10W, normally open,(NO)
Rated VoltageLess Than DC24V(for high voltage use, access intermediate relay)
Insulation Resistor108 Ohm
Switching Life108 times
Switching Response Time0.2 ms
Fix ScrewM10
Floating Diameter17 mm
Installation MethodSide mounting, vertical entry 34mm

Product Description:

Plastic PP material, switching signal,apply to mechanical equipment,instrument meter ,container water tank etc.

Technical parameter:
  • Used medium: Water or liquid that has no damage to the float,0- 60 Deg C
  • Voltage/electric current: Below DC110V, ≤0.5A
  • Custom-made: Wire harness specification, switching power
Request
Callback


Additional Information:

  • Item Code: SEN-PPY35
Yes! I am interested
X

Explore more products



Reach Us
Dileep Jain (CEO)
399, 3rd Floor, Manek Chambers
Lamington Road, Mumbai- 400004, Maharashtra, India



Call Us

Share Us

F GT L


Send E-mailSend SMS