OLED 0.96 inch 4pin RG128x64 Display Blue

The 0.96 inch 128x64 OLED display module is a compact blue OLED screen with SSD1306 driver and I2C interface. It delivers sharp graphics, wide viewing angle, and low power consumption, making it perfect for Arduino and embedded applications.

• This is the 0.96 inch OLED display module 4 pin, it is made of 128x64 individual blue OLED pixels, and each one is turned on or off by the controller chip.
• It works without a backlight, that is, in a dark environment this OLED display module is higher compared to that of an LCD display you will like the miniature for its crispness.
• The driver chip of this OLED is SSD1306, which is compatible with I2C communication. This is an I2C OLED display with a 0.96 inch display, So this module can be controlled by I2C.
• That is, except for the VCC and GND, 2 wires would be needed when using 4-wires I2C mode.
• There is also a simple switch-cap charge pump that turns 5v into a low-voltage drive for the OLEDs.
• This is the best display module in the market to use in your  project.